DFR0327
Arduino expansion shield for Raspberry Pi B+/2B/3B/3B+/4B

- Arduino Analog I/O
- 6
- Arduino Digital I/O
- 20
- Onboard Microcontroller
- ATmega32u4
- Raspberry Pi B+ GPIO
- 16
Arduino expansion shield for Raspberry Pi B+/2B/3B/3B+/4B
DFRobot Gravity Sensor & Actuator System
Arduino expansion shield for Raspberry Pi B+/2B/3B/3B+/4B, combining Raspberry Pi computing power with the fast I/O of an Arduino microcontroller, for example in a mobile robot.
DFRobot DFR0327. Arduino expansion shield for Raspberry Pi B+/2B/3B/3B+/4B, a board that adds an Arduino-type microcontroller to a Raspberry Pi.
Main characteristics. The shield integrates an ATmega32u4 microcontroller, the chip of the Arduino Leonardo, with Arduino-compatible pin mapping and compatibility with all standard Arduino shields and sensors. It operates at a system voltage of 5 V and provides 20 digital I/O and 6 analog I/O. Dimensions are 86 mm x 61 mm x 26 mm.
Interfaces and connectivity. On the Raspberry Pi B+ side, the board exposes 16 GPIO pins, one I2C bus, one ID_I2C bus, one SPI bus and one TTL UART. These interfaces allow data exchange between the Raspberry Pi and the components connected to the shield.
Typical uses. The Raspberry Pi handles complex processing, vision, wireless communication and algorithms, while the Arduino drives the motors and delivers fast responses, for example obstacle avoidance, since it runs without an operating system and its response to rapid changes is much shorter.
Integration. The shield mounts on a compatible Raspberry Pi and is programmed like an Arduino. It ships with a 20 cm micro USB cable. Optional boards such as a relay module, a motor shield or a GSM/GPS shield can be combined with it. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0327, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Arduino Analog I/O | 6 |
| Arduino Digital I/O | 20 |
| Dimension | 86mm x 61mm x 26mm (3.46" x 2.20" x 1.02") |
| Gravity | Arduino Shield for Raspberry Pi B+/2B/3B/3B+/4B |
| Onboard Microcontroller | ATmega32u4 |
| Raspberry Pi B+ GPIO | 16 |
| Raspberry Pi B+ I2C | 1 |
| Raspberry Pi B+ ID_I2C | 1 |
| Raspberry Pi B+ SPI | 1 |
| Raspberry Pi B+ TTL UART | 1 |
| System Voltage | 5v |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0327. For a missing document or a specific revision, our experts send it to you.
Arduino expansion shield for Raspberry Pi B+/2B/3B/3B+/4B, combining Raspberry Pi computing power with the fast I/O of an Arduino microcontroller, for example in a mobile robot.
| Parameter | Value |
|---|---|
| Arduino Analog I/O | 6 |
| Arduino Digital I/O | 20 |
| Dimension | 86mm x 61mm x 26mm (3.46" x 2.20" x 1.02") |
| Gravity | Arduino Shield for Raspberry Pi B+/2B/3B/3B+/4B |
| Onboard Microcontroller | ATmega32u4 |
| Raspberry Pi B+ GPIO | 16 |
| Raspberry Pi B+ I2C | 1 |
| Raspberry Pi B+ ID_I2C | 1 |
| Raspberry Pi B+ SPI | 1 |
| Raspberry Pi B+ TTL UART | 1 |
| System Voltage | 5v |
Answers to the questions that the recorded characteristics of DFR0327 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Raspberry Pi B+ I2C": 1.
Yes — recorded under "Raspberry Pi B+ SPI": 1.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Arduino expansion shield for Raspberry Pi B+/2B/3B/3B+/4B

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0327 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details