DFR0356
Gravity I/O expansion shield for Bluno Beetle microcontroller

- Vin input range
- 5-8v
- Mounting hole diameter
- 3mm
- Analog input pins
- A0–A3 (4 channels)
- Analog Input Pins x4
- A0-A3
Gravity I/O expansion shield for Bluno Beetle microcontroller
DFRobot Gravity Sensor & Actuator System
The DFRobot DFR0356 expansion shield converts the analog and digital pins of the Bluno Beetle microcontroller into 3-pin Gravity connectors for quick sensor and actuator connection.
Overview. The DFRobot Gravity: Bluno Beetle Shield (reference DFR0356) is an I/O expansion board for the Bluno Beetle microcontroller platform. It converts the limited pins of the Beetle into 3-pin Gravity connectors, each providing a dedicated signal, VCC and GND line.
Main characteristics. The board exposes four analog inputs (A0 to A3) and four digital I/O pins (D2 to D5), each reachable through a 3-pin Gravity connector, allowing several modules to be connected at the same time.
Interfaces and connectivity. Gravity connectors provide signal, VCC and GND in a consistent layout, which reduces wiring errors and removes the need for jumper wiring when attaching Gravity-series modules.
Power. The shield includes an external Vin input accepting 5 to 8 V and an on-board power switch. The Gravity connector power lines distribute voltage and ground to connected peripherals.
Mounting. Compact format with 3 mm mounting holes, suited to embedded prototypes, wearable electronics and small robotics.
Typical uses. Rapid prototyping of multi-sensor embedded systems, assembly of compact controllers and integration of Gravity modules without loose wiring.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0356, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Analog input pins | A0–A3 (4 channels) |
| Analog Input Pins x4 | A0-A3 |
| Connector Type | 3‑pin Gravity interface (Signal, VCC, GND) |
| Digital I/O pins | D2–D5 (4 channels) |
| Digital I/O Pins x4 | D2-D5 |
| Gravity | Bluno Beetle Shield |
| Mounting hole diameter | 3mm |
| Power Control | On-board power switch |
| Vin input range | 5-8v |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0356. For a missing document or a specific revision, our experts send it to you.
The DFRobot DFR0356 expansion shield converts the analog and digital pins of the Bluno Beetle microcontroller into 3-pin Gravity connectors for quick sensor and actuator connection.
| Parameter | Value |
|---|---|
| Analog input pins | A0–A3 (4 channels) |
| Analog Input Pins x4 | A0-A3 |
| Connector Type | 3‑pin Gravity interface (Signal, VCC, GND) |
| Digital I/O pins | D2–D5 (4 channels) |
| Digital I/O Pins x4 | D2-D5 |
| Gravity | Bluno Beetle Shield |
| Mounting hole diameter | 3mm |
| Power Control | On-board power switch |
| Vin input range | 5-8v |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Gravity I/O expansion shield for Bluno Beetle microcontroller

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0356 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details