DFR0399 – DC micro metal gear motor with driver, 75:1 reduction

DC micro metal gear motor with driver, 75:1 reduction

DFRobot Gravity Sensor & Actuator System

  • 500us-2500us
  • 1400us-1600us
  • Gravity 3-Pin
  • 40mA@6V (approx)
Manufacturer part number
DFR0399
Manufacturer
DFRobot
PPM signal pulse width range
500us-2500us
Stop Pulse Width Range
1400us-1600us

DC micro metal gear motor with integrated driver, controlled by a single PWM or PPM signal through a 3-pin Gravity interface. Designed for rapid prototyping and robotics.

Product overview

Overview. The DFR0399 from DFRobot is a DC micro metal gear motor with a 75:1 reduction ratio and an onboard driver. It combines a brushed DC motor, a metal gearbox and the control electronics in one module, removing the need for an external H-bridge and its wiring.

Main characteristics. Operating voltage from 3.5 V to 8 V. No-load current of approximately 40 mA at 6 V. Static current below 1 mA when no PWM control signal is applied.

Interface and control. 3-pin Gravity interface combining power, ground and signal. Direction and speed are set by a PWM or PPM signal: PPM pulse width range of 500 µs to 2500 µs with 1 µs resolution, anticlockwise range of 1700 µs to 2500 µs, clockwise range of 500 µs to 1300 µs and stop range of 1400 µs to 1600 µs.

Typical uses. Robot wheels, small mechanical actuators and motion demonstrations, driven directly from a microcontroller such as an Arduino.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Anticlockwise pulse width range: 1700us-2500us (2500us speed maximum)
  • Clockwise pulse width range: 500us-1300us (500us speed maximum)
  • DC Micro Metal Gear Motor w/Driver - 75: 1 x1
  • Gravity: DC Micro Metal Gear Motor with Driver (75:1)
  • Interface: Gravity 3-Pin
  • No-load current: 40mA@6V (approx)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote