DFR0430 – Micro metal gear DC motor with driver, 30:1 reduction

Micro metal gear DC motor with driver, 30:1 reduction

DFRobot Gravity Sensor & Actuator System

  • 500us-2500us
  • 1400us-1600us
  • Gravity 3-Pin
  • 40mA@6V (approx)
Manufacturer part number
DFR0430
Manufacturer
DFRobot
PPM signal pulse width range
500us-2500us
Stop Pulse Width Range
1400us-1600us

The DFR0430 from DFRobot is a 30:1 micro DC metal gear motor with an integrated driver controlled by a single signal through the Gravity interface, for Arduino projects.

Product overview

Overview. The DFR0430 from DFRobot is a micro DC geared motor with a 30:1 reduction ratio and metal gears, supplied with its integrated driver and designed to be controlled from an Arduino. It combines the features of a DC motor and a 360-degree servo.

Control. A single control signal, sent through the 3-pin Gravity interface, handles forward and reverse rotation and speed. The PPM pulse width range is 500 us to 2500 us, with a resolution of 1 us. Anticlockwise rotation corresponds to a pulse width of 1600 us to 2500 us, clockwise to 500 us to 1400 us, and the stop range to 1400 us to 1600 us. The PWM frequency is 500 Hz.

Power and consumption. The motor operates from 3.5 V to 8 V. The no-load current is approximately 40 mA at 6 V. Without a PWM control signal, the static current is below 1 mA. The embedded control chip takes a small share of the input voltage, so the motor voltage is slightly reduced and the speed slightly lower than the rated speed.

Uses. The geared motor suits DIY projects and small mechanical builds driven by a microcontroller. The Arduino Servo library supports up to 12 motors on most Arduino boards and 48 on the Arduino Mega.

Shipping list. One DC Micro Metal Gear Motor with driver, 30:1, and one Gravity 3-pin cable.

See all specifications

Highlights

  • Anticlockwise pulse width range: 1600us-2500us (2500us speed maximum)
  • Clockwise pulse width range: 500us-1400us (500us speed maximum)
  • DC Micro Metal Gear Motor w/Driver - 30: 1 x1
  • Gravity: DC Micro Metal Gear Motor w/Driver For Arduino - 30:1
  • Interface: Gravity 3-Pin
  • No-load current: 40mA@6V (approx)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote