DFR0554
16x2 RGB I2C LCD Display for Arduino

- Operating Temperature
- -20 to +70℃
- Operating Current
- ≤60mA
- Storage Temperature
- -30 to +80℃
- Backlight
- RGB can adjust backlight
16x2 RGB I2C LCD Display for Arduino
DFRobot Gravity Sensor & Actuator System
DFRobot DFR0554 16x2 RGB LCD display with I2C interface for character display with adjustable RGB backlight on an Arduino board.
Overview. The DFR0554 from DFRobot is a 16x2 LCD display with I2C interface from the Gravity range, showing two lines of 16 characters with RGB font and adjustable RGB backlight. It offers 16 million colour combinations.
Main characteristics. The display supports screen scrolling and cursor movement. Its dimensions are 87.0 x 32.0 x 13.0 mm. It operates from 3.3 V to 5.0 V with an operating current of 60 mA or less.
Interfaces and connectivity. Communication is over I2C, requiring only two communication lines, which also handle backlight control. A Gravity 4-pin I2C/UART sensor cable is included.
Power and environment. The operating temperature range is -20 to +70 ℃, and the storage temperature range is -30 to +80 ℃.
Typical uses. With the dedicated Arduino library, the display can be set up without cumbersome wiring or complex code, for example to show a measured value from an Arduino board.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0554, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Backlight | RGB can adjust backlight |
| Communication mode | I2C |
| Dimension | 87.0*32.0*13.0mm/3.43*1.26*0.51in |
| Display Description | 16*2 |
| Gravity | I2C 16x2 Arduino LCD with RGB Font Display (Black) V2.0 |
| Operating Current | ≤60mA |
| Operating Temperature | -20 to +70℃ |
| Operating Voltage | 3.3V~5.0V |
| Storage Temperature | -30 to +80℃ |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0554. For a missing document or a specific revision, our experts send it to you.
DFRobot DFR0554 16x2 RGB LCD display with I2C interface for character display with adjustable RGB backlight on an Arduino board.
| Parameter | Value |
|---|---|
| Backlight | RGB can adjust backlight |
| Communication mode | I2C |
| Dimension | 87.0*32.0*13.0mm/3.43*1.26*0.51in |
| Display Description | 16*2 |
| Gravity | I2C 16x2 Arduino LCD with RGB Font Display (Black) V2.0 |
| Operating Current | ≤60mA |
| Operating Temperature | -20 to +70℃ |
| Operating Voltage | 3.3V~5.0V |
| Storage Temperature | -30 to +80℃ |
Points to check before using DFR0554 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | ≤60mA |
| Operating Voltage | 3.3V~5.0V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0554 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Backlight": RGB can adjust backlight.
Yes — recorded under "Communication mode": I2C.
-20 to +70℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
16x2 RGB I2C LCD Display for Arduino

Gravity: I2C IP68 Waterproof Ambient Light Sensor (1-65535lx)

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0554 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details