SEN0562
IP68 waterproof I2C ambient light sensor

- Operating Temperature
- -40 to 85°C/-40 to 185℉
- Detection range
- 1 - 65535lx
- Supply voltage
- 5V
- Operating Current
- 1µA
IP68 waterproof I2C ambient light sensor
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0562 digital ambient light sensor measuring 1 to 65535 lx, with I2C communication and IP68 protection for outdoor environments.
Overview. The DFRobot SEN0562 is a digital ambient light sensor, named Gravity: I2C IP68 Waterproof Ambient Light Sensor, which measures the light intensity of its surroundings over a range of 1 to 65535 lx. It is intended for outdoor applications exposed to moisture.
Main characteristics. Detection range of 1 to 65535 lx with an accuracy of 1.2 lx and an operating current of 1 µA. The sensor is powered at 5 V.
Interfaces and connectivity. The SEN0562 communicates over an I2C bus, allowing direct connection to a microcontroller such as an Arduino UNO. Its Gravity interface simplifies wiring.
Power and environment. The sensor operates between -40 and 85 °C (-40 to 185 °F) and has an IP68 waterproof rating, which according to the manufacturer allows full immersion in water without damage. It comes with a 1 m cable of 3 mm diameter.
Mounting. The thread length is 10 mm, the cutout size 26 mm and the wrench size 31 mm, which simplifies installation in an enclosure or on a panel.
Typical uses. The uses named by the manufacturer are greenhouses, to check plant light exposure, smart car lights and weather stations.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0562, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 5V |
| Accuracy | 1.2lx |
| Cable Diameter | 3mm |
| Communication mode | I2C |
| Cutout size | 26mm |
| Detection range | 1 - 65535lx |
| Gravity | I2C IP68 Waterproof Ambient Light Sensor (1-65535lx) |
| Operating Current | 1µA |
| Operating Temperature | -40 to 85°C/-40 to 185℉ |
| Thread Length | 10mm |
| Waterproof rating | IP68 |
| Wire length | 1m |
| Wrench Size | 31mm |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0562. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0562 digital ambient light sensor measuring 1 to 65535 lx, with I2C communication and IP68 protection for outdoor environments.
| Parameter | Value |
|---|---|
| Supply voltage | 5V |
| Accuracy | 1.2lx |
| Cable Diameter | 3mm |
| Communication mode | I2C |
| Cutout size | 26mm |
| Detection range | 1 - 65535lx |
| Gravity | I2C IP68 Waterproof Ambient Light Sensor (1-65535lx) |
| Operating Current | 1µA |
| Operating Temperature | -40 to 85°C/-40 to 185℉ |
| Thread Length | 10mm |
| Waterproof rating | IP68 |
| Wire length | 1m |
| Wrench Size | 31mm |
Points to check before using SEN0562 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 5V |
| Operating Current | 1µA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0562 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication mode": I2C.
5V (source: Supply voltage).
-40 to 85°C/-40 to 185℉ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
IP68 waterproof I2C ambient light sensor

Gravity: DHT22 Temperature & Humidity Sensor

Gravity: Capacitive Non-contact Liquid Level Sensor(3mm TR, IP67)

Gravity: 1602 LCD Keypad Shield For Arduino

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0562 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details