SEN0485
Capacitive non-contact liquid level sensor 3 mm IP67

- Thickness Range
- 3mm
- Supply voltage
- 5V
- Working current
- <5mA
- Storage Temperature
- -20~85°C
Capacitive non-contact liquid level sensor 3 mm IP67
DFRobot Gravity Sensor & Actuator System
The DFRobot SEN0485 detects the presence of 0-100°C conductive liquids through the wall of a non-metallic container, with a low-level digital output, for non-contact level detection.
Overview. The DFRobot SEN0485 is a small 5 V capacitive non-contact liquid level sensor with a Gravity interface, designed to detect the level of 0-100°C conductive liquids in non-metallic containers, with a sensing range of 3 mm.
Main characteristics. The module provides a high/low digital output (low level output), draws less than 5 mA and operates between -5 and 80°C, with storage possible between -20 and 85°C. Its small size eases integration.
Protection and environment. The module is rated IP67: its housing is seamless and fully enclosed in waterproof glue encapsulation, blocking dust intrusion and protecting internal components. Its cable, flexible, durable, waterproof and oil-proof, offers great electrical conductivity.
Typical uses. The SEN0485 suits level detection in a water tank, a beverage machine, a water pipe or a laboratory test tube, connecting directly to an Arduino UNO board.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0485, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 5V |
| Applicable Medium | 0-100°C conductive liquid (can only detect non-metallic containers) |
| Gravity | Capacitive Non-contact Liquid Level Sensor(3mm TR, IP67) |
| Output mode | high/low(low level output) |
| Protection Level | IP67 |
| Storage Temperature | -20~85°C |
| Thickness Range | 3mm |
| Working current | <5mA |
| Working temperature | -5~80°C |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0485. For a missing document or a specific revision, our experts send it to you.
The DFRobot SEN0485 detects the presence of 0-100°C conductive liquids through the wall of a non-metallic container, with a low-level digital output, for non-contact level detection.
| Parameter | Value |
|---|---|
| Supply voltage | 5V |
| Applicable Medium | 0-100°C conductive liquid (can only detect non-metallic containers) |
| Gravity | Capacitive Non-contact Liquid Level Sensor(3mm TR, IP67) |
| Output mode | high/low(low level output) |
| Protection Level | IP67 |
| Storage Temperature | -20~85°C |
| Thickness Range | 3mm |
| Working current | <5mA |
| Working temperature | -5~80°C |
Points to check before using SEN0485 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 5V |
| Working current | <5mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0485 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Applicable Medium": 0-100°C conductive liquid (can only detect non-metallic containers).
5V (source: Supply voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Capacitive non-contact liquid level sensor 3 mm IP67

Gravity: DHT22 Temperature & Humidity Sensor

Gravity: I2C IP68 Waterproof Ambient Light Sensor (1-65535lx)

Gravity: 1602 LCD Keypad Shield For Arduino

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0485 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details