DFR0556
16x2 I2C LCD Display Module with Green Backlight

- Operating Temperature
- -20 to +70°C
- Operating Current
- ≤20mA
- Storage Temperature
- -30 to +80°C
- Backlight
- Green
16x2 I2C LCD Display Module with Green Backlight
DFRobot Gravity Sensor & Actuator System
A 16x2 character liquid crystal display module with I2C interface, compatible with 3.3V and 5V, for showing information on development boards and embedded systems.
Overview. The DFRobot DFR0556 is a 16x2 character LCD display module with green backlight, part of the Gravity range. It displays messages and data on microcontroller boards, single-board computers and embedded systems.
Main characteristics. 16 columns by 2 rows display, green backlight, dimensions of 87.0 × 32.0 × 13.0 mm and an operating current of 20 mA or less.
Interfaces and connectivity. I2C communication, which reduces wiring to two signal lines compared with traditional parallel LCD1602 modules and eases integration on a bus shared with other sensors.
Power and environment. Operating voltage of 3.3V to 5.0V, operating temperature of -20 to +70°C and storage temperature of -30 to +80°C.
Typical uses. Displaying status and measurements on development boards, robot control panels or compact instruments. The module connects directly to a controller with an I2C port.
Integration. The contrast requires no manual adjustment with a potentiometer. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0556, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Backlight | Green |
| Communication mode | I2C |
| Dimension | 87.0*32.0*13.0mm/3.43*1.26*0.51in |
| Display Description | 16*2 |
| Gravity | I2C LCD1602 LCD Display Module (Green) |
| Operating Current | ≤20mA |
| Operating Temperature | -20 to +70°C |
| Operating Voltage | 3.3V~5.0V |
| Storage Temperature | -30 to +80°C |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0556. For a missing document or a specific revision, our experts send it to you.
A 16x2 character liquid crystal display module with I2C interface, compatible with 3.3V and 5V, for showing information on development boards and embedded systems.
| Parameter | Value |
|---|---|
| Backlight | Green |
| Communication mode | I2C |
| Dimension | 87.0*32.0*13.0mm/3.43*1.26*0.51in |
| Display Description | 16*2 |
| Gravity | I2C LCD1602 LCD Display Module (Green) |
| Operating Current | ≤20mA |
| Operating Temperature | -20 to +70°C |
| Operating Voltage | 3.3V~5.0V |
| Storage Temperature | -30 to +80°C |
Points to check before using DFR0556 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | ≤20mA |
| Operating Voltage | 3.3V~5.0V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0556 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication mode": I2C.
-20 to +70°C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
16x2 I2C LCD Display Module with Green Backlight

Gravity: I2C IP68 Waterproof Ambient Light Sensor (1-65535lx)

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0556 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details