DFR0577
I/O Expansion Shield for pyboard v1.1 with Gravity connectors

- Analog Input Range
- 0~3.3V
- Interface Signal Level
- High Level 3.3V, Low Level 0V
- External Power Supply Voltage
- 5~12V
- External Power Input Current
- <1A
I/O Expansion Shield for pyboard v1.1 with Gravity connectors
DFRobot Gravity Sensor & Actuator System
I/O expansion board for the pyboard v1.1 development platform, connecting Gravity sensors and modules without soldering for rapid prototyping.
Overview. The Gravity I/O Expansion Shield for Pyboard from DFRobot (reference DFR0577) is a prototyping expansion board designed for the pyboard v1.1 platform and MicroPython development. It provides standardized, color-coded Gravity connectors for attaching sensors and modules without soldering or complex wiring.
Interfaces and connectivity. The board exposes 12 digital ports, 8 analog ports, one serial port and 2 I2C ports. The analog ports accept an input range of 0 to 3.3 V. Interface signal levels are 3.3 V for high level and 0 V for low level.
Power and environment. An onboard LDO provides a 3.3 V output with an output current below 500 mA. The external power supply accepts 5 to 12 V with an input current below 1 A. Ports X1 to X4 can be set to 3.3 V or VIN power, allowing high-current components such as servos or motors to be connected with an external supply and the power switch set to VIN.
Dimensions and typical uses. Board size is 33 mm × 42.6 mm. It suits prototyping of sensor systems, actuator control and educational experiments in MicroPython, relying on the Gravity module ecosystem.
Integration. When mounted on the pyboard, the board's wire terminal must align with the same side as the USB port. All signals must remain within 0 to 3.3 V.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0577, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Analog Input Range | 0~3.3V |
| Board Size | 33mm*42.6mm |
| Connector | Gravity series standard connector |
| External Power Input Current | <1A |
| External Power Supply Voltage | 5~12V |
| Gravity | I/O Expansion Shield for Pyboard |
| Interface Signal Level | High Level 3.3V, Low Level 0V |
| Onboard LDO Output Current | <500mA |
| Onboard LDO Output Voltage | 3.3V |
| Ports | 12 sets of digital ports, 8 sets of analog ports, 1 set of serial port, 2 sets of I2C ports |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0577. For a missing document or a specific revision, our experts send it to you.
I/O expansion board for the pyboard v1.1 development platform, connecting Gravity sensors and modules without soldering for rapid prototyping.
| Parameter | Value |
|---|---|
| Analog Input Range | 0~3.3V |
| Board Size | 33mm*42.6mm |
| Connector | Gravity series standard connector |
| External Power Input Current | <1A |
| External Power Supply Voltage | 5~12V |
| Gravity | I/O Expansion Shield for Pyboard |
| Interface Signal Level | High Level 3.3V, Low Level 0V |
| Onboard LDO Output Current | <500mA |
| Onboard LDO Output Voltage | 3.3V |
| Ports | 12 sets of digital ports, 8 sets of analog ports, 1 set of serial port, 2 sets of I2C ports |
Points to check before using DFR0577 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| External Power Input Current | <1A |
| External Power Supply Voltage | 5~12V |
| Onboard LDO Output Current | <500mA |
| Onboard LDO Output Voltage | 3.3V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0577 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Ports": 12 sets of digital ports, 8 sets of analog ports, 1 set of serial port, 2 sets of I2C ports.
5~12V (source: External Power Supply Voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
I/O Expansion Shield for pyboard v1.1 with Gravity connectors

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0577 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details