DFR0588
Analog temperature and humidity sensor SHT30

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
Analog temperature and humidity sensor SHT30
DFRobot Gravity Sensor & Actuator System
DFRobot Gravity analog temperature and humidity sensor based on the Sensirion SHT30, with linear voltage output for environmental monitoring and automation.
Overview. The Gravity: Analog SHT30 Temperature & Humidity Sensor from DFRobot, reference DFR0588, is a temperature and humidity sensor built around the Sensirion SHT30 chip. It belongs to the DFRobot Gravity Sensor & Actuator System range.
Main characteristics. The sensor is internally auto-calibrated and outputs an analog voltage linear with temperature or humidity. Its temperature range is -40 to 125 ℃, with a 14-bit resolution of 0.01 ℃ and an accuracy of ±0.2 ℃ between 10 and 55 ℃ (typical). For humidity, the range is 0 to 100 %RH, with a 14-bit resolution of 0.006 % and an accuracy of ±3 %RH between 10 and 90 %RH (typical). Response time is greater than 2 s for temperature and greater than 8 s for humidity.
Interfaces and connectivity. The sensor uses a Gravity analog interface, PH2.0-3P, with an analog voltage output of 0.3 to 2.7 V. The kit includes an XH2.54-4P black header and two Gravity-3P analog sensor cables.
Power and environment. The input voltage (VCC) ranges from 3.3 V to 5.5 V, compatible with 3.3 V and 5 V controllers. Quiescent current is below 0.5 mA. Dimensions are 30 × 32 mm and weight is 3 g.
Typical uses. The sensor is intended for urban environmental monitoring, intelligent buildings and industrial automation, as indicated by the manufacturer.
Integration. The manufacturer states compatibility with controllers such as Arduino, micro:bit and ESP32, with connection diagrams for Arduino UNO and micro:bit.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for DFR0588. For a missing document or a specific revision, our experts send it to you.
DFRobot Gravity analog temperature and humidity sensor based on the Sensirion SHT30, with linear voltage output for environmental monitoring and automation.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Analog temperature and humidity sensor SHT30

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0588 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details