DFR0626
16-Channel I2C Digital I/O Expansion Module

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
16-Channel I2C Digital I/O Expansion Module
DFRobot Gravity Sensor & Actuator System
I2C digital input/output expansion module based on the MCP23017 chip, adding 16 I/Os to a microcontroller, with up to 8 addresses allowing 128 I/Os in total.
Overview. The DFRobot DFR0626 (MCP23017) is an I2C digital input/output expansion module based on the MCP23017 chip. It adds 16 I/Os to a microcontroller and addresses the shortage of IO ports in robotics and interactive media applications.
Main characteristics. The module has two groups of pins, GPIOA and GPIOB, each with 8 independent IO interfaces. Each interface can be set as input, output, pull-up input (100 KΩ pull-up resistor) or interrupt. The IA and IB pins produce a high-level signal when an interrupt occurs on GPIOA or GPIOB. Multiple VCC and GND pins are provided.
Interfaces and connectivity. The bus is I2C, with an address selectable by dial switch from 0x20 to 0x27. Up to 8 modules can be connected to one microcontroller, expanding to 128 IOs.
Power and environment. Operating voltage of 3.3 V to 5.5 V, compatible with both 3.3 V and 5 V. Digital input/output current of 20 mA. Dimensions 44 x 32 mm.
Typical uses. IO expansion of microcontrollers in robots and interactive media.
Integration. Supplied with the module and a Gravity-4P I2C/UART cable.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for DFR0626. For a missing document or a specific revision, our experts send it to you.
I2C digital input/output expansion module based on the MCP23017 chip, adding 16 I/Os to a microcontroller, with up to 8 addresses allowing 128 I/Os in total.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
16-Channel I2C Digital I/O Expansion Module

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0626 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details