Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0627 – I2C to Dual UART Expansion Module

I2C to Dual UART Expansion Module

DFRobot Gravity Sensor & Actuator System

  • RS-485
Manufacturer part number
DFR0627
Manufacturer
DFRobot

DFRobot I2C to dual UART converter module that adds two serial ports to a controller board, useful for connecting several UART devices.

Product overview

Overview. The DFRobot DFR0627, Gravity: I2C to Dual UART Module, is an I2C to dual UART converter module designed to add serial ports to a controller board.

Main characteristics. Each sub UART has an independent 256-byte hardware FIFO buffer for transmit and receive. The baud rate, word length and check format of each sub UART can be set independently. The maximum communication rate is 2 Mbps, and up to four modules can be connected to one controller board to expand up to 8 hardware serial ports.

Interfaces and connectivity. The module connects through a Gravity-I2C 4-pin port and provides 2 expanded UART ports. It is supplied with a Gravity-4P I2C/UART sensor connector.

Power and environment. The operating voltage ranges from 3.3 V to 5.5 V, with an operating current below 3 mA. The operating temperature range is -40 °C to 85 °C. Dimensions are 32.5 × 27 mm.

Typical uses. The module suits Arduino, Raspberry Pi or micro:bit boards that lack enough UART ports, for example to connect an Internet of Things module, an ultrasonic ranging module or a GPS module. It can also serve applications with strict timing requirements, such as an IR receiver module or WS2818 RGB LED projects.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote