Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0972 – I2C 4-20mA DAC Module, Arduino Compatible

I2C 4-20mA DAC Module, Arduino Compatible

DFRobot Gravity Sensor & Actuator System

  • 4-20 mA current loop
Manufacturer part number
DFR0972
Manufacturer
DFRobot

I2C DAC module converting digital signals into 4-20mA current to drive motors, inverters, valves and pumps from an Arduino or other microcontroller.

Product overview

Overview. The DFR0972 from DFRobot is an I2C DAC module with 4-20mA current output, intended for controlling motors, inverters, valves and pumps from an Arduino or other microcontroller. It outputs 0-25mA and provides an accurate 4-20mA output after calibration.

Main characteristics. GP8302 chip, 12-bit resolution (input value range 0x000-0xFFF), accuracy of 0.5% before calibration and 0.2% after calibration. Start-up time below 2 ms and power consumption below 5 mA.

Interfaces and connectivity. I2C communication, I2C address 0x58, I2C input signal high level between 2.7 V and 5 V. Provided sample code lets users set the output current by a digital value.

Power and environment. Power supply of 18 V to 24 V (24 V recommended), operating temperature from -40 °C to 125 °C. Maximum load of 450 Ω with an 18 V supply and 750 Ω with a 24 V supply.

Typical uses. Control of industrial devices with a 4-20mA current loop from a microcontroller platform, in automation and control projects.

Integration. The module acts as a bridge between a microcontroller board and an industrial system. It requires an external 18 V to 24 V power supply for proper 4-20mA loop operation.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote