DFR0991
I2C RGB LED Colorful Button Module with Interrupt

- Adjustable Color Range
- R: 0-255, G: 0-255, B: 0-255
- Dimensions
- 37mm×32mm×19.5mm/1.46×1.26×0.77"
- Button Life
- 200,000 continuous presses
- Button Travel Distance
- 2.2±0.2mm
I2C RGB LED Colorful Button Module with Interrupt
DFRobot Gravity Sensor & Actuator System
DFRobot Gravity I2C button module with a controllable RGB LED, for interactive user interfaces, mini keyboards and IoT or DIY projects.
Overview. The DFRobot Gravity DFR0991 is an I2C button module with an RGB LED, allowing the button status to be read while independently controlling the LED colour and on/off state. A mechanical keyboard-like button provides tactile feedback, and the LED gives a soft and even light.
Main characteristics. The LED colour is adjustable on each of the R, G and B channels from 0 to 255. The button has a travel distance of 2.2±0.2 mm and a life of 200,000 continuous presses. Dimensions are 37 mm × 32 mm × 19.5 mm.
Interfaces and connectivity. The module communicates over I2C and provides two I2C ports for simple cascading. An onboard 3-bit DIP switch sets eight distinct I2C addresses, allowing up to 8 modules to be cascaded without occupying additional ports. An interrupt interface outputs HIGH when the button is pressed, for highly real-time tasks.
Power and connectors. The module operates from a DC supply of 3.3 V to 5 V. It ships with a PH2.0-4P Gravity-standard connector, and a 2.54-5P pin header is also provided.
Typical uses. Simulated elevator buttons, mini matrix keyboards, IoT projects and DIY electronic projects.
Integration. The module ships with a Gravity-4P I2C/UART sensor cable. Projects using several modules benefit from cascading up to eight units on the same I2C bus.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0991, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 37mm×32mm×19.5mm/1.46×1.26×0.77" |
| Adjustable Color Range | R: 0-255, G: 0-255, B: 0-255 |
| Button Life | 200,000 continuous presses |
| Button Travel Distance | 2.2±0.2mm |
| Communication | I2C |
| Connector | PH2.0-4P (Gravity standard), 2.54-5P pin header |
| Gravity | I2C RGB LED Colorful Button Module |
| Interrupt Mode | the interrupt interface outputs HIGH when the button is pressed |
| Maximum Cascading Modules | 8 |
| Operating Voltage | DC 3.3V-5V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0991. For a missing document or a specific revision, our experts send it to you.
DFRobot Gravity I2C button module with a controllable RGB LED, for interactive user interfaces, mini keyboards and IoT or DIY projects.
| Parameter | Value |
|---|---|
| Dimensions | 37mm×32mm×19.5mm/1.46×1.26×0.77" |
| Adjustable Color Range | R: 0-255, G: 0-255, B: 0-255 |
| Button Life | 200,000 continuous presses |
| Button Travel Distance | 2.2±0.2mm |
| Communication | I2C |
| Connector | PH2.0-4P (Gravity standard), 2.54-5P pin header |
| Gravity | I2C RGB LED Colorful Button Module |
| Interrupt Mode | the interrupt interface outputs HIGH when the button is pressed |
| Maximum Cascading Modules | 8 |
| Operating Voltage | DC 3.3V-5V |
Answers to the questions that the recorded characteristics of DFR0991 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication": I2C.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
I2C RGB LED Colorful Button Module with Interrupt

Gravity: SHT31-F Digital Temperature and Humidity Sensor

Gravity: SGP40 Air Quality Sensor

Gravity: ICP-10111 Pressure Sensor

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0991 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details