SEN0517
Barometric Pressure and Temperature Sensor I2C

- Barometric pressure measurement range
- 30~110kPa
- Working current
- <2mA
- Absolute Temperature Measurement Accuracy
- ±0.4℃
- Dimensions
- 30mm x 22mm/1.18 x 0.87inch
Barometric Pressure and Temperature Sensor I2C
DFRobot Gravity Sensor & Actuator System
DFRobot Gravity barometric pressure and temperature sensor built around TDK's ICP-10111, designed for altitude measurement and indoor and outdoor navigation.
Overview. The DFRobot SEN0517 is a barometric pressure and temperature sensor from the Gravity range, built around TDK's ICP-10111 sensor based on MEMS capacitor technology. It is designed for pressure and altitude measurement.
Main characteristics. The barometric pressure measurement range is 30 to 110 kPa. Relative pressure accuracy is ±1 Pa and pressure noise is 0.4 Pa. The temperature coefficient offset is ±0.5 Pa/℃ at 100 kPa between 25℃ and 45℃, and absolute temperature measurement accuracy is ±0.4℃.
Interfaces and connectivity. The sensor communicates over I2C, with I2C address 0x63. It ships with a 2.54-4P I2C/UART sensor connector.
Power and environment. Working voltage is 3.3 V to 5.5 V, with a working current below 2 mA. Working temperature ranges from -40℃ to 85℃. Dimensions are 30 mm x 22 mm.
Typical uses. UAV height control, indoor navigation and positioning, vertical speed measurement.
Integration. The module connects directly to an I2C bus, allowing integration into a microcontroller-based embedded system.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0517, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 30mm x 22mm/1.18 x 0.87inch |
| Absolute Temperature Measurement Accuracy | ±0.4℃ |
| Barometric pressure measurement range | 30~110kPa |
| Communication | I2C |
| Gravity | ICP-10111 Pressure Sensor |
| I2C Address | 0x63 |
| Temperature Coefficient Offset | ±0.5 Pa/℃ (100kPa, 25℃~45℃) |
| Working current | <2mA |
| Working temperature | -40℃~85℃ |
| Working voltage | 3.3V~5.5V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0517. For a missing document or a specific revision, our experts send it to you.
DFRobot Gravity barometric pressure and temperature sensor built around TDK's ICP-10111, designed for altitude measurement and indoor and outdoor navigation.
| Parameter | Value |
|---|---|
| Dimensions | 30mm x 22mm/1.18 x 0.87inch |
| Absolute Temperature Measurement Accuracy | ±0.4℃ |
| Barometric pressure measurement range | 30~110kPa |
| Communication | I2C |
| Gravity | ICP-10111 Pressure Sensor |
| I2C Address | 0x63 |
| Temperature Coefficient Offset | ±0.5 Pa/℃ (100kPa, 25℃~45℃) |
| Working current | <2mA |
| Working temperature | -40℃~85℃ |
| Working voltage | 3.3V~5.5V |
Answers to the questions that the recorded characteristics of SEN0517 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication": I2C.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Barometric Pressure and Temperature Sensor I2C

Gravity: I2C RGB LED Colorful Button Module

Gravity: SHT31-F Digital Temperature and Humidity Sensor

Gravity: SGP40 Air Quality Sensor

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0517 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details