DFR1114 – N20 Micro Metal Gear Motor with Integrated Drive 133 RPM

N20 Micro Metal Gear Motor with Integrated Drive 133 RPM

DFRobot Gravity Sensor & Actuator System

  • 500μs-2500μs
  • 1400μs-1600μs
  • 50mA (under 6V)
  • 640mA
Manufacturer part number
DFR1114
Manufacturer
DFRobot
Stop Pulse Width Range
1400μs-1600μs
No-load current
50mA (under 6V)

N20 micro metal gear motor with 1:150 gearbox and integrated drive, controlled by a single PWM signal for speed and direction. Used in robotics, mechanical motion control, valves and door locks.

Product overview

Overview. The DFRobot DFR1114 is an N20 micro metal gear motor with integrated drive, a 360-degree servo-type motor controlled by PWM. It is offered in DFRobot's Gravity range.

Main characteristics. All-metal motor measuring L40mm × W12mm × H20mm for a weight of 10g. With a 150:1 gearbox it reaches 133 RPM at no load, with a stall torque of 1.0 kg*cm and a stall current of 640mA.

Control and interfaces. A single PWM port sets both speed and direction. The PPM signal has a resolution of 1μs, a positive pulse width range of 500μs to 2500μs and a PWM drive frequency of 500 Hz. The forward range is 500μs to 1400μs, the stop zone 1400μs to 1600μs and the reverse range 1600μs to 2500μs. The PH2.0-3P connector follows the standard Gravity line sequence.

Power and consumption. The operating voltage range is 3V to 6V, with a rated voltage of 6V. No-load current is 50mA at 6V and static current is below 1mA when no PWM control signal is applied.

Typical uses. Robotics, mechanical motion control, valve control and door lock control.

Integration. The motor connects directly to an Arduino UNO R3 following the manufacturer's connection diagram. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Dimensions: L40mm × W12mm × H20mm
  • Forward Pulse Width Range: 500μs-1400μs (maximum speed at 500μs)
  • Gearbox Reduction Ratio: 150:1
  • Gravity: N20 Micro Metal Gear Motor with Integrated Drive (3V-6V, 1:150/133RPM)
  • Motor Speed (Unreduced): 20,000 RPM
  • No-load current: 50mA (under 6V)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote