DFR1184
15-bit Dual-Channel 0-10V High-Precision ADC Module

- Input Range
- 0-10V
- Supply voltage
- 3.3-5V DC
- Accuracy
- ±2mV
- Chip
- ADS1115
15-bit Dual-Channel 0-10V High-Precision ADC Module
DFRobot Gravity Sensor & Actuator System
DFRobot dual-channel 0-10V ADC module with 15-bit resolution, bridging industrial 0-10V sensors to Arduino, Raspberry Pi and ESP32 boards.
Overview. The DFRobot DFR1184 is a dual-channel 0-10V analog-to-digital converter module designed for Arduino, Raspberry Pi and ESP32 boards. It is built around the Texas Instruments ADS1115 chip.
Main characteristics. The module provides 15-bit resolution, equal to 0.3125 mV, and ±2 mV accuracy over a 0-10V input range. It operates from a 3.3-5V DC supply.
Interfaces and connectivity. The module communicates over I2C and UART. The Gravity-4P I2C/UART cable supplied with the module simplifies wiring.
Typical uses. The module allows direct connection of sensors with 0-10V outputs, such as pressure, flow or wind speed sensors, without external signal conditioning. It suits industrial automation monitoring, environmental parameter measurement and tracking of signals from energy meters.
Integration. Thanks to its I2C and UART interfaces, the module can be connected to a range of controllers, including industrial programmable logic controllers.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR1184, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 3.3-5V DC |
| Accuracy | ±2mV |
| Chip | ADS1115 |
| Communication | I2C/UART |
| Gravity | 0-10V 15-Bit Dual-Channel High-Precision ADC Module for Arduino / Raspberry Pi / ESP32 |
| Input Range | 0-10V |
| Resolution | 15-bit (0.3125mV) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR1184. For a missing document or a specific revision, our experts send it to you.
DFRobot dual-channel 0-10V ADC module with 15-bit resolution, bridging industrial 0-10V sensors to Arduino, Raspberry Pi and ESP32 boards.
| Parameter | Value |
|---|---|
| Supply voltage | 3.3-5V DC |
| Accuracy | ±2mV |
| Chip | ADS1115 |
| Communication | I2C/UART |
| Gravity | 0-10V 15-Bit Dual-Channel High-Precision ADC Module for Arduino / Raspberry Pi / ESP32 |
| Input Range | 0-10V |
| Resolution | 15-bit (0.3125mV) |
Points to check before using DFR1184 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 3.3-5V DC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR1184 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication": I2C/UART.
3.3-5V DC (source: Supply voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
15-bit Dual-Channel 0-10V High-Precision ADC Module

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR1184 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details