DFR1193
I2C address translation module for identical sensor conflicts

- Mounting Hole
- φ3.0mm
- Dimension
- 42*32mm
- Working temperature
- 0~70℃
- Working voltage
- 2.25~5.5V DC
I2C address translation module for identical sensor conflicts
DFRobot Gravity Sensor & Actuator System
The DFRobot DFR1193 is an I2C address shifter built on the LTC4316. It lets several identical I2C sensors operate on one bus without any firmware change.
DFRobot DFR1193 is an I2C address shifter module based on the LTC4316, designed to let identical sensors share one I2C bus. Overview — The module sits between a host controller, such as an Arduino Uno R3 or a Raspberry Pi 4, and an I2C peripheral. Address translation is performed at the hardware level, so no firmware adaptation or additional library is required on the host controller. Address configuration — Four address offsets are selectable through onboard DIP switches. Additional combinations can be created by soldering external resistors. Physical characteristics — 42 × 32 mm dimensions, φ3.0 mm mounting hole, Gravity format with no soldering required. Power and environment — Working voltage 2.25 to 5.5 V DC, working temperature 0 to 70 ℃. Typical uses — Deploying several identical I2C sensors in monitoring systems, environmental sensing arrays or robotics platforms without replacing components.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR1193, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimension | 42*32mm |
| Gravity | LTC4316 I2C Address Shifter Module for I2C Conflict Resolution |
| Mounting Hole | φ3.0mm |
| Working temperature | 0~70℃ |
| Working voltage | 2.25~5.5V DC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR1193. For a missing document or a specific revision, our experts send it to you.
The DFRobot DFR1193 is an I2C address shifter built on the LTC4316. It lets several identical I2C sensors operate on one bus without any firmware change.
| Parameter | Value |
|---|---|
| Dimension | 42*32mm |
| Gravity | LTC4316 I2C Address Shifter Module for I2C Conflict Resolution |
| Mounting Hole | φ3.0mm |
| Working temperature | 0~70℃ |
| Working voltage | 2.25~5.5V DC |
Answers to the questions that the recorded characteristics of DFR1193 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": LTC4316 I2C Address Shifter Module for I2C Conflict Resolution.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
I2C address translation module for identical sensor conflicts

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR1193 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details