DFR1229
1-Channel I2C and PWM to 0-5V/0-10V/4-20mA DAC Module, 16-bit

- Power/Communication Interface
- PH2.0-4Pin/3Pin
- Number of Channels
- 1 channel
- Mounting hole diameter
- 3.0 mm
- Mounting Hole Spacing
- 25mm
1-Channel I2C and PWM to 0-5V/0-10V/4-20mA DAC Module, 16-bit
DFRobot Gravity Sensor & Actuator System
The DFRobot GP8600 converts I2C or PWM digital signals into industrial analog outputs 0-5V, 0-10V or 4-20mA to drive analog equipment from a microcontroller.
DFRobot GP8600. The DFRobot GP8600 is a 16-bit digital-to-analog converter module from the Gravity range, converting I2C or PWM signals into standard industrial analog outputs, such as the 1-channel I2C and PWM to 0-5V/0-10V/4-20mA DAC module.
Main characteristics. GP8600 chip, one channel, full-scale error of ±0.2% measured after fitting calibration, with 0-5V, 0-10V and 4-20mA output ranges.
Interfaces and connectivity. I2C or PWM control inputs, power and communication connector PH2.0 with 4 or 3 pins.
Power and environment. Operating voltage between 3.3V and 5V.
Typical uses. Control of analog equipment such as drives, valves or lighting from a logic-level controller, for example an Arduino, an ESP32 or a Raspberry Pi, depending on the available I2C and PWM interfaces.
Integration. Mounting with 3.0 mm diameter holes spaced 25 mm apart, PCB dimensions 38 × 32 × 12.39 mm.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR1229, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Chip Model | GP8600 |
| Full-Scale Error | ±0.2% (measured after fitting calibration) |
| Gravity | GP8600 1-Channel I2C & PWM to 0-5V / 0-10V / 4-20mA DAC Module (16-bit) |
| Input Signal | I2C / PWM |
| Mounting hole diameter | 3.0 mm |
| Mounting Hole Spacing | 25mm |
| Number of Channels | 1 channel |
| Operating Voltage | 3.3V-5V |
| PCB Dimensions | 38 × 32 × 12.39 mm |
| Power/Communication Interface | PH2.0-4Pin/3Pin |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR1229. For a missing document or a specific revision, our experts send it to you.
The DFRobot GP8600 converts I2C or PWM digital signals into industrial analog outputs 0-5V, 0-10V or 4-20mA to drive analog equipment from a microcontroller.
| Parameter | Value |
|---|---|
| Chip Model | GP8600 |
| Full-Scale Error | ±0.2% (measured after fitting calibration) |
| Gravity | GP8600 1-Channel I2C & PWM to 0-5V / 0-10V / 4-20mA DAC Module (16-bit) |
| Input Signal | I2C / PWM |
| Mounting hole diameter | 3.0 mm |
| Mounting Hole Spacing | 25mm |
| Number of Channels | 1 channel |
| Operating Voltage | 3.3V-5V |
| PCB Dimensions | 38 × 32 × 12.39 mm |
| Power/Communication Interface | PH2.0-4Pin/3Pin |
Answers to the questions that the recorded characteristics of DFR1229 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": GP8600 1-Channel I2C & PWM to 0-5V / 0-10V / 4-20mA DAC Module (16-bit).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
1-Channel I2C and PWM to 0-5V/0-10V/4-20mA DAC Module, 16-bit

Gravity: GP8630N I2C/PWM to ±10V / 4-20mA DAC Module (16-bit)

Gravity: GP8512 1-Channel 15-Bit I2C DAC Module (0-2.5V/VCC)

Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR1229 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details