GP8630N – 16-bit I2C/PWM to ±10 V / 4-20 mA DAC Module

16-bit I2C/PWM to ±10 V / 4-20 mA DAC Module

DFRobot Gravity Sensor & Actuator System

  • PH2.0-4Pin/3Pin
  • 1 channel
  • 3.0 mm
  • 25mm
Manufacturer part number
DFR1230
Manufacturer
DFRobot
Dual interface support
I2C and PWM input signals
Number of Channels
1 channel

DFRobot Gravity DFR1230 16-bit digital-to-analog converter turning I2C or PWM signals into ±10 V or 4-20 mA analog outputs for driving analog equipment. Available on quotation.

Product overview

Overview. The DFRobot Gravity GP8630N DFR1230 is a 16-bit digital-to-analog converter (DAC) that turns I2C or PWM digital signals into stable analog voltage or current outputs. It is built around the GP8630N chip.

Main characteristics. The module provides a symmetrical ±10 V output, allowing direct control of bidirectional devices without an external bridge circuit. Its full-scale error is ±0.2% after calibration, and it has one channel.

Interfaces and connectivity. It accepts two input types, I2C and PWM, and its power and communication connector is a PH2.0 4-pin or 3-pin connector.

Power and environment. The operating voltage ranges from 3.3 V to 5 V. The PCB measures 42 × 32 × 12.39 mm, with 3.0 mm mounting holes spaced 25 mm apart.

Typical uses. The module suits control of servo motors and valves, and generation of analog setpoint signals in automation and robotics projects.

Integration. The module connects to a controller with I2C or PWM outputs at 3.3 V or 5 V logic levels. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Chip Model: GP8630N
  • Dual interface support: I2C and PWM input signals
  • Full-Scale Error: ±0.2% (measured after fitting calibration)
  • Gravity: GP8630N I2C/PWM to ±10V / 4-20mA DAC Module (16-bit)
  • Input Signal: I2C / PWM
  • Mounting hole diameter: 3.0 mm

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote