TM6605 – I2C Haptic Motor Driver for LRA Motors with 44 Vibration Modes

I2C Haptic Motor Driver for LRA Motors with 44 Vibration Modes

DFRobot Gravity Sensor & Actuator System

  • -40°C ~ +85°C
  • 3.7V–5.2V
  • Gravity I2C
  • 9.5μA
Manufacturer part number
DRI0056
Manufacturer
DFRobot
Operating Temperature
-40°C ~ +85°C
Wide operating voltage range
3.7V–5.2V

DFRobot LRA motor driver module built around the TM6605 chip, controlled over I2C, with 44 built-in vibration effects for tactile feedback in embedded interfaces.

Product overview

Overview. The DFRobot DRI0056 is a TM6605 haptic driver module for Linear Resonant Actuator (LRA) motors, controlled through simple I2C commands. It is supplied with an LRA motor and a Gravity 4-pin cable. Main characteristics — The module provides 44 pre-programmed vibration modes and automatic resonance tracking, which keeps the motor at its optimal operating frequency across the 140 Hz to 220 Hz supported range. The board measures 30 mm × 20 mm and has φ3.0 mm mounting holes. Interfaces and connectivity — The Gravity I2C interface connects directly to development boards such as Arduino or Raspberry Pi. Power and environment — The module operates from 3.7 V to 5.2 V DC, with a standby current of 9.5 μA and an operating temperature range of -40 °C to +85 °C. Typical uses — Tactile feedback for user interfaces, robots and control devices, added to a prototype or embedded product.

Integration. The Gravity I2C connector allows a plug-and-play connection to common embedded controllers.

See all specifications

Highlights

  • Built-in Effects: 44 Vibration Modes
  • Driver Chip: TM6605
  • Gravity: I2C Haptic Motor Driver for LRA Motors (TM6605, 44 Modes)
  • Interface: Gravity I2C
  • Mounting Hole Size: φ3.0m
  • Operating Temperature: -40°C ~ +85°C

Good to know before integrating

  • Thermal: rated operating range -40°C ~ +85°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote