KIT0021
Waterproof DS18B20 temperature sensor kit

- Usable temperature range
- -55 to 125°C (-67°F to +257°F)
- Cable Diameter
- 4mm(0.16")
- Length
- 90cm(35.43")
- Operating Voltage
- 3.0~ 5.5V
Waterproof DS18B20 temperature sensor kit
DFRobot Gravity Sensor & Actuator System
DFRobot waterproof temperature sensor kit with DS18B20 probe on a 1-Wire interface, for temperature measurement in wet environments and connection to an Arduino microcontroller.
Overview. The DFRobot Gravity KIT0021 kit combines a waterproof DS18B20 temperature probe with a resistor module, and includes a pluggable terminal adapter for connection to an Arduino board without soldering.
Main characteristics. The DS18B20 sensor provides 9 to 12-bit selectable temperature readings, with ±0.5 °C accuracy from -10 °C to +85 °C and a usable range of -55 to 125 °C. Each sensor has a unique 64-bit ID burned into the chip, and a temperature-limit alarm system is included. Query time is less than 750 ms.
Interfaces and connectivity. Communication uses the 1-Wire interface, which requires only one digital pin and ground. Multiple sensors can share one pin. The 4 mm diameter cable has three wires, with two possible wiring layouts, type A or type B.
Power and environment. The operating voltage is 3.0 to 5.5 V. The stainless steel tube probe is 6 mm in diameter by 35 mm long, and the cable is 90 cm long.
Typical uses. This kit suits temperature measurement at several points in a liquid or humid environment, for example in a water purifier project used together with the Gravity Analog TDS sensor.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for KIT0021, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Cable Diameter | 4mm(0.16") |
| Gravity | Waterproof DS18B20 Temperature Sensor Kit |
| Length | 90cm(35.43") |
| Operating Voltage | 3.0~ 5.5V |
| Usable temperature range | -55 to 125°C (-67°F to +257°F) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for KIT0021. For a missing document or a specific revision, our experts send it to you.
DFRobot waterproof temperature sensor kit with DS18B20 probe on a 1-Wire interface, for temperature measurement in wet environments and connection to an Arduino microcontroller.
| Parameter | Value |
|---|---|
| Cable Diameter | 4mm(0.16") |
| Gravity | Waterproof DS18B20 Temperature Sensor Kit |
| Length | 90cm(35.43") |
| Operating Voltage | 3.0~ 5.5V |
| Usable temperature range | -55 to 125°C (-67°F to +257°F) |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Waterproof DS18B20 temperature sensor kit

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | KIT0021 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details