SEN0204
Non-contact Digital Liquid Level Sensor for Arduino

- Operating Temperature
- 0 ~ 105 ℃
- Current consumption
- 5 mA
- Output Current
- 1 ~ 50 mA
- Response time
- 500 ms
Non-contact Digital Liquid Level Sensor for Arduino
DFRobot Gravity Sensor & Actuator System
Non-contact digital liquid level sensor for Arduino, suited to toxic, strong acid or strong alkali liquids and to liquids in airtight containers under high pressure. Gravity interface and adjustable sensitivity.
Digital sensor. DFRobot SEN0204 is a non-contact digital liquid level sensor for Arduino that detects the liquid level without touching the liquid, using advanced signal processing.
Main characteristics. Sensitivity is adjustable with the potentiometer on the back of the sensor, over a detection thickness range of 0 to 13 mm. Response time is 500 ms and current consumption 5 mA.
Connectivity. An interface adapter makes it compatible with the DFRobot Gravity interface, and a Gravity digital 3-pin cable is included. The output is high level equal to InVCC and low level 0 V, with an output current of 1 to 50 mA.
Power and environment. Operating voltage DC 5 to 24 V, operating temperature 0 to 105 ℃, humidity 5% to 100%, waterproof rating IP67. The ABS housing measures 28 × 28 mm.
Typical uses. Level detection of toxic, strong acid or strong alkali liquids, and of liquids in airtight containers under high pressure, without direct contact with the liquid.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0204, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Current consumption | 5 mA |
| Response time | 500 ms |
| Dimension | 28 * 28 mm / 1.1 * 1.1 inches |
| Gravity | Non-contact Digital Liquid Level Sensor for Arduino |
| Humidity | 5% ~ 100% |
| Operating Temperature | 0 ~ 105 ℃ |
| Operating Voltage (InVCC) | DC 5 ~ 24 v |
| Output Current | 1 ~ 50 mA |
| Output voltage (high level) | InVCC |
| Output voltage (low level) | 0V |
| Waterproof Performance | IP67 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0204. For a missing document or a specific revision, our experts send it to you.
Non-contact digital liquid level sensor for Arduino, suited to toxic, strong acid or strong alkali liquids and to liquids in airtight containers under high pressure. Gravity interface and adjustable sensitivity.
| Parameter | Value |
|---|---|
| Current consumption | 5 mA |
| Response time | 500 ms |
| Dimension | 28 * 28 mm / 1.1 * 1.1 inches |
| Gravity | Non-contact Digital Liquid Level Sensor for Arduino |
| Humidity | 5% ~ 100% |
| Operating Temperature | 0 ~ 105 ℃ |
| Operating Voltage (InVCC) | DC 5 ~ 24 v |
| Output Current | 1 ~ 50 mA |
| Output voltage (high level) | InVCC |
| Output voltage (low level) | 0V |
| Waterproof Performance | IP67 |
Points to check before using SEN0204 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Current consumption | 5 mA |
| Operating Voltage (InVCC) | DC 5 ~ 24 v |
| Output Current | 1 ~ 50 mA |
| Output voltage (high level) | InVCC |
| Output voltage (low level) | 0V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0204 can answer. A question is not asked when nothing is recorded to answer it.
0 ~ 105 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Non-contact Digital Liquid Level Sensor for Arduino

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0204 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details