SEN0211 – Analog AC current sensor 20 A non-invasive

Analog AC current sensor 20 A non-invasive

DFRobot Gravity Sensor & Actuator System

  • 0-20A
  • 0-1V (AC RMS)
  • 50Hz~1kHz
  • 3.3V-5.5V
Manufacturer part number
SEN0211
Manufacturer
DFRobot
AC Current Range
0-20A
AC Voltage Input Range
0-1V (AC RMS)

The DFRobot SEN0211 measures AC current up to 20 A without cutting wires, using an open transformer probe and an analog signal module. It suits monitoring motors, lighting and electrical equipment.

Product overview

Overview. The DFRobot SEN0211 is an analog AC current sensor (Gravity: Analog AC Current Sensor 20A). It consists of an open-type AC transformer probe and a signal conversion module that outputs an analog voltage readable by a microcontroller.

Main characteristics. The measurement range is 0-20 A, with an accuracy of ±1%, a non-linearity of at most ±0.2% and a relative error of ±4%. The frequency range covers 50 Hz to 1 kHz.

Interfaces and connectivity. The module uses a Gravity Analog interface (PH2.0-3P) providing an analog voltage output of 0.2 to 2.8 V DC. The probe connects to the module through a standard Φ3.5 mm 3-pin plug, with a 1 m cable.

Power and environment. The input voltage (VCC) ranges from 3.3 V to 5.5 V. The working temperature extends from -25 °C to +70 °C.

Typical uses. The sensor measures the current of AC motors, lighting equipment or air compressors without contact, without cutting or soldering the conductors.

Integration. Compatibility with 3V3/5V micro-controllers allows the analog output to be connected directly to a board such as an Arduino UNO.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • AC Current Range: 0-20A
  • AC Voltage Input Range: 0-1V (AC RMS)
  • Accuracy: ±1%
  • Cable Length: 1m
  • Dimension: 32×27 mm /1.26×1.06 in
  • Frequency Range: 50Hz~1kHz

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote