SEN0216
Digital water flow sensor for Arduino, 1/8" fitting

- Working Humidity Range
- 35% ~ 90% RH (no frost)
- Voltage Range
- 5~12 V
- Water Flow Range
- 0.3-6 L/min
- Operating Current
- 15 mA (DC 5V)
Digital water flow sensor for Arduino, 1/8" fitting
DFRobot Gravity Sensor & Actuator System
The SEN0216 is a DFRobot digital water flow sensor with pulse output, designed to connect to an Arduino microcontroller to measure liquid flow rate.
Overview. The SEN0216 from DFRobot is a digital water flow sensor for Arduino, in the Gravity series, with a 1/8" fitting. It measures the flow rate of a liquid using a plastic valve body, a rotor and a Hall effect sensor.
Main characteristics. Flow range of 0.3 to 6 L/min, accuracy of ±5% (0.3 to 3 L/min), inner diameter of 4 mm and outside diameter of 7 mm. The output signal follows the formula 1 L = 5880 square waves, with an output pulse duty ratio of 50% ± 10%.
Interfaces and connectivity. The pulse output has a high level above 4.5 VDC and a low level below 0.5 VDC for a 5 V input. The sensor connects directly to a microcontroller to monitor flow.
Power and environment. Voltage range of 5 to 12 V, operating current of 15 mA at 5 V DC, insulation resistance above 100 MΩ, proof water pressure below 0.8 MPa. Working humidity range of 35% to 90% RH, no frost. Dimensions of 58 × 35 × 26 mm and a weight of 30 g.
Typical uses. Flow monitoring on water-using devices such as a coffee maker or a sprinkler, with control of the flow rate to suit the application.
Installation. Vertical mounting required, tilt no more than 5 degrees. A 6 mm hose is recommended, the liquid temperature must stay below 120 °C, and the unit must not be in contact with corrosive chemicals.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0216, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | ±5% (0.3-3L/min) |
| Dimension | 58*35*26 mm/2.28*1.37*1.02 inches |
| Gravity | Digital Water Flow Sensor For Arduino - 1/8" |
| Inner diameter | 4 mm |
| Insulation Resistance | >100 MΩ |
| Operating Current | 15 mA (DC 5V) |
| Output Pulse Duty Ratio | 50% ± 10% |
| Outside Diameter | 7 mm |
| Proof Water Pressure | <0.8 MPa |
| The Output Pulse High Level | >4.5 VDC (DC input voltage 5 V) |
| The Output Pulse Low Level | <0.5 VDC (DC input voltage 5 V) |
| Voltage Range | 5~12 V |
| Water-flow Formula | 1L = 5880 square waves |
| Water Flow Range | 0.3-6 L/min |
| Weight | 30g |
| Working Humidity Range | 35% ~ 90% RH (no frost) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0216. For a missing document or a specific revision, our experts send it to you.
The SEN0216 is a DFRobot digital water flow sensor with pulse output, designed to connect to an Arduino microcontroller to measure liquid flow rate.
| Parameter | Value |
|---|---|
| Accuracy | ±5% (0.3-3L/min) |
| Dimension | 58*35*26 mm/2.28*1.37*1.02 inches |
| Gravity | Digital Water Flow Sensor For Arduino - 1/8" |
| Inner diameter | 4 mm |
| Insulation Resistance | >100 MΩ |
| Operating Current | 15 mA (DC 5V) |
| Output Pulse Duty Ratio | 50% ± 10% |
| Outside Diameter | 7 mm |
| Proof Water Pressure | <0.8 MPa |
| The Output Pulse High Level | >4.5 VDC (DC input voltage 5 V) |
| The Output Pulse Low Level | <0.5 VDC (DC input voltage 5 V) |
| Voltage Range | 5~12 V |
| Water-flow Formula | 1L = 5880 square waves |
| Water Flow Range | 0.3-6 L/min |
| Weight | 30g |
| Working Humidity Range | 35% ~ 90% RH (no frost) |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Digital water flow sensor for Arduino, 1/8" fitting

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0216 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details