SEN0221
360 Degree Hall Angle Sensor with 0-5V Analog Output

- Operating Temperature
- -30 ℃ ~ +80 ℃
- Operating Current
- <13.5mA
- Accuracy
- ± 0.3% FS
- Output Shaft Dimensions
- 6mm (D Sharp)
360 Degree Hall Angle Sensor with 0-5V Analog Output
DFRobot Gravity Sensor & Actuator System
Non-contact Hall effect angle sensor measuring continuous rotation from 0 to 360 degrees and delivering a proportional 0-5V analog signal for angular position measurement.
Overview. The DFRobot SEN0221 is a rotation measurement module based on the Hall effect. Powered from 5V DC, it delivers a proportional 0-5V DC analog signal (ratiometric), directly readable by the analog inputs of a microcontroller such as an Arduino.
Main characteristics. Mechanical angle range of 0 to 360 degrees without stops, resolution of 0.088 degree with a 12-bit ADC, accuracy of ± 0.3 % FS, refresh rate of 0.6 ms or 0.2 ms in high-speed mode. Rotational torque is below 5 mN·m and mechanical life exceeds 50 million revolutions.
Construction and environment. Aluminum alloy housing and stainless steel bearings, IP40 protection class, operating temperature from -30 °C to +80 °C. Operating voltage is 5V ± 10% and operating current below 13.5 mA. Output shaft 6 mm D-shaped, weight 36 g.
Typical uses. Measurement of angular position in mechanical control systems, robotics and embedded automation assemblies, for example position feedback of a rotating mechanism.
Integration. The module connects to the DFRobot Gravity interface. Allowable axial loads are below 5 N horizontal and below 10 N vertical.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0221, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | ± 0.3% FS |
| Allowable Axial Load | Horizontal <5N; Vertical <10N |
| Gravity | 360 Degree Hall Angle Sensor (0-5V Analog Output) |
| Mechanical Angle | 0 - 360° (Non stop) |
| Mechanical Life | > 50 million revolutions |
| Operating Current | <13.5mA |
| Operating Temperature | -30 ℃ ~ +80 ℃ |
| Operating Voltage | 5V ± 10% |
| Output Shaft Dimensions | 6mm (D Sharp) |
| Output signal | 0-5V DC (Ratio) |
| Protection Class | IP40 |
| Refresh Rate | 0.6ms / 0.2ms (high speed) |
| Resolution | 0.088° (12-bit ADC) |
| Rotational Torque | <5mN·m |
| Weight | 36g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0221. For a missing document or a specific revision, our experts send it to you.
Non-contact Hall effect angle sensor measuring continuous rotation from 0 to 360 degrees and delivering a proportional 0-5V analog signal for angular position measurement.
| Parameter | Value |
|---|---|
| Accuracy | ± 0.3% FS |
| Allowable Axial Load | Horizontal <5N; Vertical <10N |
| Gravity | 360 Degree Hall Angle Sensor (0-5V Analog Output) |
| Mechanical Angle | 0 - 360° (Non stop) |
| Mechanical Life | > 50 million revolutions |
| Operating Current | <13.5mA |
| Operating Temperature | -30 ℃ ~ +80 ℃ |
| Operating Voltage | 5V ± 10% |
| Output Shaft Dimensions | 6mm (D Sharp) |
| Output signal | 0-5V DC (Ratio) |
| Protection Class | IP40 |
| Refresh Rate | 0.6ms / 0.2ms (high speed) |
| Resolution | 0.088° (12-bit ADC) |
| Rotational Torque | <5mN·m |
| Weight | 36g |
Points to check before using SEN0221 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | <13.5mA |
| Operating Voltage | 5V ± 10% |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0221 can answer. A question is not asked when nothing is recorded to answer it.
-30 ℃ ~ +80 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
360 Degree Hall Angle Sensor with 0-5V Analog Output

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0221 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details