SEN0224
Ultra-Low-Power Triaxial I2C Accelerometer ±16g

- Operating Temperature
- -40 ℃ ~ +85 ℃
- Interface
- Gravity-I2C interface
- Frequency
- 1Hz ~ 5.3KHz
- Adjustable Sensitivity
- ± 2g / ± 4g / ± 8g / ± 16g
Ultra-Low-Power Triaxial I2C Accelerometer ±16g
DFRobot Gravity Sensor & Actuator System
Triaxial MEMS LIS2DH accelerometer with Gravity I2C interface, adjustable sensitivity from ±2g to ±16g and 2µA consumption in low-power mode, for motion and orientation detection.
Overview. The DFRobot SEN0224 is a Gravity I2C triaxial accelerometer based on the MEMS LIS2DH chip, designed for integration in projects requiring low power consumption.
Main characteristics. Sensitivity is adjustable to ±2g, ±4g, ±8g or ±16g, with 16-bit data output and a frequency range from 1Hz to 5.3KHz. The module embeds a temperature sensor and an embedded FIFO, along with 2 independent programmable interrupt generators for free-fall and motion detection. It supports 6D/4D orientation detection.
Interfaces and connectivity. The module uses a Gravity-I2C interface with on-board I2C level conversion, compatible with 3.3V and 5V devices.
Power and environment. The operating voltage ranges from 3.3V to 5V, with a built-in LDO. Current consumption is 2µA in low-power mode (50Hz ODR) and 11µA in normal mode (50Hz ODR). The operating temperature range is -40 ℃ to +85 ℃. The module measures 26.2 × 26.2 mm and weighs 12 g.
Typical uses. Motion detection, display orientation control, shake control, pedometer, gaming and virtual reality input devices, and impact recognition and logging.
Integration. The module connects simply through the Gravity connector and works with Arduino-compatible boards.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0224, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Adjustable Sensitivity | ± 2g / ± 4g / ± 8g / ± 16g |
| Frequency | 1Hz ~ 5.3KHz |
| Gravity | I2C Triple Axis Accelerometer - LIS2DH (±16g) |
| Interface | Gravity-I2C interface |
| Module size | 26.2 × 26.2 (mm) /1.03 x 1.03 (inches) |
| Operating Current | 2uA (low-power mode 50Hz ODR) / 11uA (normal mode 50Hz ODR) |
| Operating Temperature | -40 ℃ ~ +85 ℃ |
| Operating Voltage | 3.3V ~ 5V |
| Weight | 12 g Shipping List |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0224. For a missing document or a specific revision, our experts send it to you.
Triaxial MEMS LIS2DH accelerometer with Gravity I2C interface, adjustable sensitivity from ±2g to ±16g and 2µA consumption in low-power mode, for motion and orientation detection.
| Parameter | Value |
|---|---|
| Adjustable Sensitivity | ± 2g / ± 4g / ± 8g / ± 16g |
| Frequency | 1Hz ~ 5.3KHz |
| Gravity | I2C Triple Axis Accelerometer - LIS2DH (±16g) |
| Interface | Gravity-I2C interface |
| Module size | 26.2 × 26.2 (mm) /1.03 x 1.03 (inches) |
| Operating Current | 2uA (low-power mode 50Hz ODR) / 11uA (normal mode 50Hz ODR) |
| Operating Temperature | -40 ℃ ~ +85 ℃ |
| Operating Voltage | 3.3V ~ 5V |
| Weight | 12 g Shipping List |
Points to check before using SEN0224 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | 2uA (low-power mode 50Hz ODR) / 11uA (normal mode 50Hz ODR) |
| Operating Voltage | 3.3V ~ 5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0224 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": I2C Triple Axis Accelerometer - LIS2DH (±16g).
Yes — recorded under "Adjustable Sensitivity": ± 2g / ± 4g / ± 8g / ± 16g.
-40 ℃ ~ +85 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ultra-Low-Power Triaxial I2C Accelerometer ±16g

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0224 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details