SEN0232
Analog sound level meter, Arduino compatible, low-noise mic

- Measuring Range
- 30dBA ~ 130dBA
- Input Voltage
- 3.3 ~ 5.0V
- Frequency response
- 31.5Hz ~ 8.5KHz
- Frequency Weighted
- A Weighted
Analog sound level meter, Arduino compatible, low-noise mic
DFRobot Gravity Sensor & Actuator System
The SEN0232 is an Arduino-compatible analog sound level meter for measuring ambient noise levels, for example in highway noise monitoring stations or bedroom noise monitoring.
DFRobot SEN0232 sound level meter. The SEN0232 from DFRobot is an Arduino-compatible analog sound level meter (decibel meter, noise meter) that measures ambient sound levels with a low-noise microphone and an instrument-type circuit.
Main characteristics. Measuring range from 30 dBA to 130 dBA, measurement error of ±1.5 dB, A-weighted frequency response, frequency response from 31.5 Hz to 8.5 kHz and a time characteristic of 125 ms. The module measures 60 mm × 43 mm.
Output and conversion. The output voltage varies linearly from 0.6 V to 2.6 V over the 30 dBA to 130 dBA range. This linear relationship allows a simple conversion without complex algorithms.
Power. Input voltage from 3.3 V to 5.0 V, with a current draw of 22 mA at 3.3 V and 14 mA at 5.0 V.
Connection and integration. The module connects with a 3-pin Gravity analog cable, without soldering. It integrates directly with an Arduino-compatible board through its analog output voltage.
Typical uses. Environmental noise monitoring, for example in highway noise monitoring stations, or indoor noise measurement, such as in a bedroom. It can also serve as the basis for a DIY sound level detector.
Caution. Do not touch the black film on the microphone, which is a sensitive component. Do not place the module on a conductor or semiconductor surface, which would short the microphone pins; use a dry insulating surface or fix it with nylon columns.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0232, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Output voltage | 0.6 ~ 2.6V |
| Easy to use | plug and play, without soldering |
| Frequency response | 31.5Hz ~ 8.5KHz |
| Frequency Weighted | A Weighted |
| Gravity | Analog Sound Level Meter |
| High precision | use instrument circuit, low noise microphone |
| Input Voltage | 3.3 ~ 5.0V |
| Measurement Error | ±1.5dB |
| Measuring Range | 30dBA ~ 130dBA |
| Module size | 60mm * 43mm / 2.37in*1.68in |
| Simple Conversion | linear analog output, 0.6~2.6V linear correspondence, 30~130dBA; no complex algorithm is required |
| Time Characteristics | 125ms |
| Wide voltage input | 3.3~5.0V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0232. For a missing document or a specific revision, our experts send it to you.
The SEN0232 is an Arduino-compatible analog sound level meter for measuring ambient noise levels, for example in highway noise monitoring stations or bedroom noise monitoring.
| Parameter | Value |
|---|---|
| Output voltage | 0.6 ~ 2.6V |
| Easy to use | plug and play, without soldering |
| Frequency response | 31.5Hz ~ 8.5KHz |
| Frequency Weighted | A Weighted |
| Gravity | Analog Sound Level Meter |
| High precision | use instrument circuit, low noise microphone |
| Input Voltage | 3.3 ~ 5.0V |
| Measurement Error | ±1.5dB |
| Measuring Range | 30dBA ~ 130dBA |
| Module size | 60mm * 43mm / 2.37in*1.68in |
| Simple Conversion | linear analog output, 0.6~2.6V linear correspondence, 30~130dBA; no complex algorithm is required |
| Time Characteristics | 125ms |
| Wide voltage input | 3.3~5.0V |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Analog sound level meter, Arduino compatible, low-noise mic

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0232 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details