Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0237-A – Analog galvanic dissolved oxygen sensor kit with converter board

Analog galvanic dissolved oxygen sensor kit with converter board

DFRobot Gravity Sensor & Actuator System

Manufacturer part number
SEN0237-A
Manufacturer
DFRobot

Dissolved oxygen sensor kit with a galvanic probe and analog signal converter board, for measuring dissolved oxygen in water over a 0 to 20 mg/L range.

Product overview

Overview. The DFRobot SEN0237-A is a dissolved oxygen sensor kit made of a galvanic probe and a signal converter board, for measuring dissolved oxygen in water over a 0 to 20 mg/L range.

Main characteristics. The galvanic probe requires no polarization time. Response reaches up to 98% of full value within 90 seconds at 25℃. The pressure range is 0 to 50 PSI and the electrode service life is one year under normal use. The kit includes a spare membrane cap.

Interfaces and connectivity. The probe connects through a BNC connector with a 2-metre cable. The analog output signal is 0 to 3.0 V, delivered through the Gravity Analog Interface connector (PH2.0-3P).

Power and environment. The operating voltage is 3.3 to 5.5 V. The board dimensions are 42 mm × 32 mm.

Typical uses. The kit suits water quality monitoring, aquaculture, aquariums and environmental science projects, with a board compatible with Arduino, Raspberry Pi and ESP32.

Integration. A custom measurement system can be built by connecting the board to a compatible controller. The 0.5 mol/L NaOH filling solution is not included, and the probe must be prepared and calibrated before use.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote