SEN0240
Analog surface EMG sensor with reusable dry electrodes

- Operating Temperature
- 0~50℃
- Detection range
- +/-1.5mV
- Supply voltage
- +3.3V~5.5V
- Output voltage
- 0~3.0V
Analog surface EMG sensor with reusable dry electrodes
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0240 analog surface EMG sensor converting muscle activity into a 0~3.0V analog signal for non-medical interactive projects, with reusable metal dry electrodes.
Overview. The SEN0240 is an analog surface EMG sensor by DFRobot and OYMotion that turns muscle activity into an input for interactive projects. It is intended for non-medical projects.
Electrodes. The sensor uses reusable metal dry electrodes without conductive gel. The electrode board is positioned on the skin with the supplied wrist belt and linked to the transmitter by an electrode cable.
Signal processing. Signals within ±1.5mV are amplified 1000 times. Differential input and analog filtering reduce noise, including power-frequency interference. The output spans 0~3.0V around a 1.5V reference and carries the waveform of muscle activity.
Interface and power. The transmitter operates from 3.3V to 5.5V and provides a PH2.0-3P module connector, linked to an analog input by the supplied Gravity analog cable. It operates between 0 and 50℃.
Uses. The analog signal can be read by Arduino or another controller with an analog input, for muscle-waveform experiments, contraction-triggered commands and wearable prototypes.
Dimensions. The board measures 22 × 35 mm and the electrode cable is 50 cm long.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0240, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | +3.3V~5.5V |
| Output voltage | 0~3.0V |
| Detection range | +/-1.5mV |
| Electrode Connector | PJ-342 |
| Gravity | Analog EMG Sensor by OYMotion |
| Module Connector | PH2.0-3P |
| Operating Temperature | 0~50℃ |
| Operating Voltage | +3.0V |
| Plate Size | 22 * 35 mm (0.87*1.38inches) |
| Size | 22mm*35mm (0.87inch*1.38inch) |
| Wire length | 50cm(19.69inch) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0240. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0240 analog surface EMG sensor converting muscle activity into a 0~3.0V analog signal for non-medical interactive projects, with reusable metal dry electrodes.
| Parameter | Value |
|---|---|
| Supply voltage | +3.3V~5.5V |
| Output voltage | 0~3.0V |
| Detection range | +/-1.5mV |
| Electrode Connector | PJ-342 |
| Gravity | Analog EMG Sensor by OYMotion |
| Module Connector | PH2.0-3P |
| Operating Temperature | 0~50℃ |
| Operating Voltage | +3.0V |
| Plate Size | 22 * 35 mm (0.87*1.38inches) |
| Size | 22mm*35mm (0.87inch*1.38inch) |
| Wire length | 50cm(19.69inch) |
Points to check before using SEN0240 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | +3.3V~5.5V |
| Output voltage | 0~3.0V |
| Operating Voltage | +3.0V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0240 can answer. A question is not asked when nothing is recorded to answer it.
+3.3V~5.5V (source: Supply voltage).
0~50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Analog surface EMG sensor with reusable dry electrodes

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0240 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details