BME680 – I2C 4-in-1 environmental sensor: temperature, humidity, pressure, VOC

I2C 4-in-1 environmental sensor: temperature, humidity, pressure, VOC

DFRobot Gravity Sensor & Actuator System

  • 300-1100hPa
  • -40℃~+85℃
  • 3.3V~5.0V
  • 5mA (25mA in VOC)
Manufacturer part number
SEN0248
Manufacturer
DFRobot
Input Voltage
3.3V~5.0V
Operating Current
5mA (25mA in VOC)

Four-in-one environmental sensor measuring temperature, humidity, atmospheric pressure and VOC, designed for indoor air quality monitoring and IoT applications.

Product overview

DFRobot BME680. Gravity series MEMS environmental sensor with I2C interface, integrating temperature, humidity, barometer and VOC (volatile organic compounds) sensing in a single module.

Measurements. The module measures temperature from -40℃ to +85℃ with a precision of ±1.0℃ between 0 and 65℃, humidity from 0 to 100 %RH with a precision of ±3 %RH (20 to 80 %RH, 25℃), and atmospheric pressure from 300 to 1100 hPa. The IAQ (indoor air quality) index ranges from 0 to 500, the higher value indicating worse air quality.

Connectivity. The Gravity I2C connector allows plug-and-play connection without special wiring. An SPI connector is reserved for future expansion.

Power. The module accepts an input voltage of 3.3 V to 5.0 V thanks to an onboard voltage regulator and level translator, and draws 5 mA (25 mA in VOC mode). Dimensions: 30 × 22 mm.

Typical uses. Indoor air quality monitoring, weather station, smart home, Internet of Things (IoT) and wearable devices. The IAQ calculation is supported only on the FireBeetle ESP8266 microcontroller.

See all specifications

Highlights

  • Atmospheric Pressure Measurement Range: 300-1100hPa
  • Connector in Reserve: SPI
  • Gravity: I2C BME680 Environmental Sensor
  • Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
  • IAQ (Indoor Air Quality) Range: 0~500 (the larger the worse)
  • Input Voltage: 3.3V~5.0V

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote