SEN0249
Spear Tip pH Sensor Kit for Soil and Semisolid Foods

- Operating Temperature
- 5~60 ℃
- Measuring Range
- 0~10pH
- Accuracy
- ± 0.1pH
- Response time
- ≤2min(in standard buffer solution)
Spear Tip pH Sensor Kit for Soil and Semisolid Foods
DFRobot Gravity Sensor & Actuator System
Analog spear tip pH sensor kit designed to be inserted directly into semisolid materials such as wet soil and foods, with a measuring range of 0 to 10 pH.
DFRobot SEN0249 is an Arduino-compatible analog spear tip pH sensor that measures the pH of wet soil and semisolid foods directly.
Main characteristics. Measuring range of 0 to 10 pH with an accuracy of ±0.1 pH. Response time of 2 min or less in standard buffer solution. Analog output of 0 to 4.0 V with a +5.00 V input power. Operating temperature of 5 to 60 ℃.
Construction. Stainless steel spear-like protection shield with a sharp tip, allowing insertion into soft semisolid materials. Polyoxymethylene (POM) shell and polytetrafluoroethylene (PTFE) salt bridge. Dimensions of 43 mm × 32 mm, electrolyte cannot be refilled.
Connectivity. Probe with BNC connector, 850 mm wire length including the BNC connector, and module connector Gravity PH2.0 3-pin.
Typical uses. Checking the pH of soil for plant growth, and checking the freshness of meat, fruit and vegetables by direct measurement.
Integration. The kit is designed to connect to an Arduino board and quickly builds a pH meter for soil or foods. It is intended for spot measurements and should not be immersed for long periods.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0249, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Response time | ≤2min(in standard buffer solution) |
| Accuracy | ± 0.1pH |
| Dimension | 43mm×32mm(1.69inch*1.26inch) |
| Filling Solution | Can NOT be Filled |
| Gravity | Analog Spear Tip pH Sensor / Meter Kit |
| Input power | + 5.00V |
| Measuring Range | 0~10pH |
| Module Connector | Gravity: PH2.0-3Pin |
| Operating Temperature | 5~60 ℃ |
| Output signal | 0 ~ 4.0V |
| Probe Connector | BNC |
| Salt Bridge Material | Poly Tetra Fluoro Ethylene (PTFE) |
| Shell material | Polyoxymethylene (POM) |
| Wire length | 850mm (BNC connector included) |
| Wiring Connector | BNC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0249. For a missing document or a specific revision, our experts send it to you.
Analog spear tip pH sensor kit designed to be inserted directly into semisolid materials such as wet soil and foods, with a measuring range of 0 to 10 pH.
| Parameter | Value |
|---|---|
| Response time | ≤2min(in standard buffer solution) |
| Accuracy | ± 0.1pH |
| Dimension | 43mm×32mm(1.69inch*1.26inch) |
| Filling Solution | Can NOT be Filled |
| Gravity | Analog Spear Tip pH Sensor / Meter Kit |
| Input power | + 5.00V |
| Measuring Range | 0~10pH |
| Module Connector | Gravity: PH2.0-3Pin |
| Operating Temperature | 5~60 ℃ |
| Output signal | 0 ~ 4.0V |
| Probe Connector | BNC |
| Salt Bridge Material | Poly Tetra Fluoro Ethylene (PTFE) |
| Shell material | Polyoxymethylene (POM) |
| Wire length | 850mm (BNC connector included) |
| Wiring Connector | BNC |
Points to check before using SEN0249 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Input power | + 5.00V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0249 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Filling Solution": Can NOT be Filled.
5~60 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Spear Tip pH Sensor Kit for Soil and Semisolid Foods

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0249 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details