SEN0251
Barometric pressure and temperature sensor I2C/SPI

- Operating Temperature
- -40℃~80℃ (more accurate in 0℃-65℃)
- Operating Range
- 300-1250 hPa
- Operating Current
- 0.5mA
- Absolute Accuracy
- ±50 Pa(0℃-65℃@300-1100hPa)
Barometric pressure and temperature sensor I2C/SPI
DFRobot Gravity Sensor & Actuator System
DFRobot BMP388 barometric pressure and temperature sensor for altitude measurement and indoor positioning, with Gravity-I2C and SPI interfaces.
DFRobot BMP388 sensor. The Gravity: BMP388 Barometric Pressure Sensors from DFRobot (reference SEN0251) is a barometric pressure sensor that also measures temperature and supports Arduino code control. It belongs to DFRobot's Gravity range and is based on Bosch's piezoresistive pressure sensor technology.
Main characteristics. The sensor has a relative accuracy of ±8 Pa, equivalent to about ±0.5 m in altitude between 700 and 900 hPa, and an absolute accuracy of ±50 Pa between 0 °C and 65 °C over an operating range of 300 to 1100 hPa. The absolute temperature accuracy is ±0.5 °C between 0 °C and 65 °C. The operating range extends from 300 to 1250 hPa, with an operating current of 0.5 mA and a temperature coefficient offset of ±0.75 Pa/K.
Interfaces and connectivity. The module provides a 4-pin Gravity-I2C interface or an SPI interface, the SPI interface being used only at 3.3 V.
Power and environment. The operating voltage ranges from 3.3 V to 5.5 V and the operating temperature from -40 °C to 80 °C, with greater accuracy between 0 °C and 65 °C.
Typical uses. Through pressure measurement, this sensor can determine altitude and relative floor height, and, combined with an IMU sensor, supports 3D indoor positioning and navigation.
Integration. The product measures 22 mm x 30 mm, with mounting holes of 3 mm inside diameter and 6 mm outside diameter spaced 15 mm apart. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0251, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Absolute Accuracy | ±50 Pa(0℃-65℃@300-1100hPa) |
| Absolute Accuracy Temperature | ±0.5℃(@0℃-65℃) |
| External Dimension | 22mm x 30mm |
| Gravity | BMP388 Barometric Pressure Sensors |
| Interface | Gravity-I2C 4Pin or SPI (SPI is only used at 3.3V) |
| Mounting Hole Dimension | inside diameter 3mm/ outside diameter 6mm |
| Mounting Hole Position | 15mm |
| Operating Current | 0.5mA |
| Operating Range | 300-1250 hPa |
| Operating Temperature | -40℃~80℃ (more accurate in 0℃-65℃) |
| Operating Voltage | 3.3V-5.5V |
| Relative Accuracy | ±8 Pa (equivalent to ±0.50m @700-900hPa, 25℃-40℃) |
| Temperature Coefficient Offset | ±0.75 Pa/K(-20℃-65℃@700-1100hPa) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0251. For a missing document or a specific revision, our experts send it to you.
DFRobot BMP388 barometric pressure and temperature sensor for altitude measurement and indoor positioning, with Gravity-I2C and SPI interfaces.
| Parameter | Value |
|---|---|
| Absolute Accuracy | ±50 Pa(0℃-65℃@300-1100hPa) |
| Absolute Accuracy Temperature | ±0.5℃(@0℃-65℃) |
| External Dimension | 22mm x 30mm |
| Gravity | BMP388 Barometric Pressure Sensors |
| Interface | Gravity-I2C 4Pin or SPI (SPI is only used at 3.3V) |
| Mounting Hole Dimension | inside diameter 3mm/ outside diameter 6mm |
| Mounting Hole Position | 15mm |
| Operating Current | 0.5mA |
| Operating Range | 300-1250 hPa |
| Operating Temperature | -40℃~80℃ (more accurate in 0℃-65℃) |
| Operating Voltage | 3.3V-5.5V |
| Relative Accuracy | ±8 Pa (equivalent to ±0.50m @700-900hPa, 25℃-40℃) |
| Temperature Coefficient Offset | ±0.75 Pa/K(-20℃-65℃@700-1100hPa) |
Points to check before using SEN0251 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | 0.5mA |
| Operating Voltage | 3.3V-5.5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0251 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Interface": Gravity-I2C 4Pin or SPI (SPI is only used at 3.3V).
Yes — recorded under "Interface": Gravity-I2C 4Pin or SPI (SPI is only used at 3.3V).
-40℃~80℃ (more accurate in 0℃-65℃) (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Barometric pressure and temperature sensor I2C/SPI

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0251 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details