SEN0288
Analog AC current sensor 0-10 A clamp type

- AC Current Range
- 0-10 A
- AC Voltage Input Range
- 0-1V (AC RMS)
- Frequency Range
- 50Hz ~ 1kHz
- Input Voltage (VCC)
- 3.3V-5.5V
Analog AC current sensor 0-10 A clamp type
DFRobot Gravity Sensor & Actuator System
Clamp-type AC current sensor for non-contact measurement of alternating current from 0 to 10 A without cutting wires. Suited to monitoring motors and lighting circuits.
Overview. The DFRobot SEN0288 analog AC current sensor, from the Gravity range, is a clamp-type AC current sensor. It measures AC current from 0 to 10 A without cutting wires or modifying the existing circuit: the clamp is placed around a conductor, and the 3.5 mm plug connects to the conversion module.
Main characteristics. The linear measurement range is 0 to 10 A AC, with an accuracy of ±1%, a non-linearity of less than or equal to ±0.2% and a relative error of ±4%. The frequency range runs from 50 Hz to 1 kHz. The module delivers an analog output voltage of 0.2 to 2.8 V DC, and the signal output of the 3.5 mm plug is 0 to 1 V AC for 0 to 10 A.
Interfaces and connectivity. The module connects through the Gravity analog interface with a PH2.0-3P connector. The analog signal can be read directly on microcontroller boards, including Arduino boards, compatible with 3.3 V and 5 V logic levels.
Power and environment. The input voltage (VCC) is between 3.3 V and 5.5 V. The working temperature ranges from -25 °C to +70 °C. Dimensions are 32 × 27 mm, the clamp opening is 13 × 13 mm, the cable is 1 m long and the weight is 5 g.
Typical uses. This sensor allows monitoring of AC loads such as AC motors, lighting and compressors, diagnosing household appliances and supervising equipment, for example in energy monitoring projects.
Integration. Measurement is made with a simple clamp, without wiring or soldering, which facilitates rapid prototyping on a development board.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0288, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| AC Current Range | 0-10 A |
| AC Voltage Input Range | 0-1V (AC RMS) |
| Accuracy | ±1% |
| Cable Length | 1m |
| Dimension | 32 × 27 mm /1.26 × 1.06 in |
| Frequency Range | 50Hz ~ 1kHz |
| Gravity | Analog AC Current Sensor (0-10A) |
| Input Voltage (VCC) | 3.3V-5.5V |
| Interface | Gravity Analog (PH2.0-3P,analog voltage output 0.2-2.8V DC) |
| Non-Linearity | ≤±0.2% |
| Opening size | 13 × 13 mm / 0.51 × 0.51 in |
| Relative Error | ±4% |
| Signal Output (standard Φ3.5mm 3P plug) | 0-1V AC voltage, linear corresponding range 0-10A |
| Weight | 5g |
| Working temperature | -25 ℃ ~ +70 ℃ |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0288. For a missing document or a specific revision, our experts send it to you.
Clamp-type AC current sensor for non-contact measurement of alternating current from 0 to 10 A without cutting wires. Suited to monitoring motors and lighting circuits.
| Parameter | Value |
|---|---|
| AC Current Range | 0-10 A |
| AC Voltage Input Range | 0-1V (AC RMS) |
| Accuracy | ±1% |
| Cable Length | 1m |
| Dimension | 32 × 27 mm /1.26 × 1.06 in |
| Frequency Range | 50Hz ~ 1kHz |
| Gravity | Analog AC Current Sensor (0-10A) |
| Input Voltage (VCC) | 3.3V-5.5V |
| Interface | Gravity Analog (PH2.0-3P,analog voltage output 0.2-2.8V DC) |
| Non-Linearity | ≤±0.2% |
| Opening size | 13 × 13 mm / 0.51 × 0.51 in |
| Relative Error | ±4% |
| Signal Output (standard Φ3.5mm 3P plug) | 0-1V AC voltage, linear corresponding range 0-10A |
| Weight | 5g |
| Working temperature | -25 ℃ ~ +70 ℃ |
Answers to the questions that the recorded characteristics of SEN0288 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Weight": 5g.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Analog AC current sensor 0-10 A clamp type

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0288 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details