SEN0290
40 km AS3935 I2C Lightning Distance Sensor

- Maximum Detection Range
- 40 km
- Interface
- Gravity I2C (logic level: 0-VCC)
- Input Voltage
- 3.3V~5.5V
- Dimension
- 30.0mm*22.0mm/1.18*0.87 in
40 km AS3935 I2C Lightning Distance Sensor
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0290 lightning detection sensor based on the AS3935 IC, estimating storm distance up to 40 km and providing relative intensity data. Designed for weather station and microcontroller prototype projects.
Overview. The DFRobot SEN0290 is a lightning distance sensor from the Gravity range, combining an AS3935 IC and a Coilcraft MA5532-AE antenna to detect lightning activity within a maximum range of 40 km. The module is a compact board measuring 30.0 mm × 22.0 mm.
Main characteristics. The sensor estimates the distance to the storm front in 15 steps across the full 40 km range, with a distance detection resolution of 1 to 4 km. It also outputs a 21-bit relative intensity value from 0 to 16777201, which has no physical unit and is not a direct measurement of lightning current or energy.
Interfaces and connectivity. The interface is Gravity I2C with a logic level of 0 to VCC, and three selectable I2C addresses: 0x03, 0x02 and 0x01. An IRQ output signals detected events to the controller.
Power and environment. The input voltage ranges from 3.3 V to 5.5 V. The module includes a man-made disturber rejection algorithm to reduce false indications from nearby electrical equipment. Indoor and outdoor modes allow the configuration to match the installation, and this selection does not establish a waterproof rating for the board.
Typical uses. The module integrates into a home weather station, a wearable prototype or a photography project, with Arduino and Raspberry Pi projects supported. The distance reported is an estimate rather than a precise strike location.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0290, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimension | 30.0mm*22.0mm/1.18*0.87 in |
| Distance Detection Resolution | 1~4 km |
| Gravity | 40km AS3935 Lightning Distance Sensor (I2C) |
| I2C Address | Three options 0x03, 0x02, 0x01 |
| Input Voltage | 3.3V~5.5V |
| Intensity Detection Resolution | 21 bits, i.e. 0 ~16777201 |
| Interface | Gravity I2C (logic level: 0-VCC) |
| Maximum Detection Range | 40 km |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0290. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0290 lightning detection sensor based on the AS3935 IC, estimating storm distance up to 40 km and providing relative intensity data. Designed for weather station and microcontroller prototype projects.
| Parameter | Value |
|---|---|
| Dimension | 30.0mm*22.0mm/1.18*0.87 in |
| Distance Detection Resolution | 1~4 km |
| Gravity | 40km AS3935 Lightning Distance Sensor (I2C) |
| I2C Address | Three options 0x03, 0x02, 0x01 |
| Input Voltage | 3.3V~5.5V |
| Intensity Detection Resolution | 21 bits, i.e. 0 ~16777201 |
| Interface | Gravity I2C (logic level: 0-VCC) |
| Maximum Detection Range | 40 km |
Answers to the questions that the recorded characteristics of SEN0290 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": 40km AS3935 Lightning Distance Sensor (I2C).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
40 km AS3935 I2C Lightning Distance Sensor

Gravity: I2C Digital Wattmeter

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0290 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details