SEN0291
Bidirectional I2C Digital Wattmeter 26 V 8 A

- Current Range
- 0 ~ ±8A (Bidirectional current)
- Power range
- 0 ~ 206 W
- Interface
- Gravity I2C (logic level: 0-3.3V)
- Input Voltage (VCC)
- 3.3V~5.5V
Bidirectional I2C Digital Wattmeter 26 V 8 A
DFRobot Gravity Sensor & Actuator System
The DFRobot SEN0291 is an I2C digital wattmeter module measuring voltage, current and power up to 26 V and ±8 A. It is used to evaluate power consumption and battery life of solar systems, batteries and electronic modules.
DFRobot SEN0291 digital wattmeter. The Gravity: I2C Digital Wattmeter from DFRobot is a digital wattmeter module measuring voltage, current and power, designed for electronic modules, electrical equipment, solar systems and batteries.
Measurement characteristics. Voltage range of 0 to 26 V and bidirectional current range of 0 to ±8 A, with measurable power from 0 to 206 W. Resolution of 4 mV for voltage, 1 mA for current and 20 mW for power (hardware) or 4 mW (software). Typical relative error below ±0.2% for voltage and current, after a simple manual calibration before use.
High-side measurement and current direction — The module measures bidirectional current on the high side, that is the current flowing through the power supply or battery positive. The sign of the reading indicates the charge or discharge direction, which is useful for battery monitoring and motor overload detection.
Interface and addressing. Gravity I2C interface with logic levels from 0 to 3.3 V, compatible with 3.3 V and 5 V controllers. Supply from 3.3 V to 5.5 V, quiescent current of 0.7 mA. Four possible I2C addresses, 0x40, 0x41, 0x44 and 0x45, selectable via a 2-position DIP switch.
Typical uses. Evaluating the consumption of an electronic module or a complete project to estimate battery life, monitoring the output and charge of a solar panel and a battery, and real-time monitoring of motor current.
Integration. Compact module of 30 × 22 mm weighing 4 g, easy to embed in a project. Connection documented on Arduino UNO and Raspberry Pi 3B.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0291, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Current Range | 0 ~ ±8A (Bidirectional current) |
| Current Relative Error | <±0.2% (Typical, manual calibration required) |
| Current Resolution | 1mA |
| Dimension | 30.0mm*22.0mm/1.18*0.87 in |
| Gravity | I2C Digital Wattmeter |
| I2C Address | Four options 0x40, 0x41, 0x44, 0x45 |
| Input Voltage (VCC) | 3.3V~5.5V |
| Interface | Gravity I2C (logic level: 0-3.3V) |
| Power range | 0 ~ 206 W |
| Power Resolution | 20 mW (Hardware) / 4 mW (Software) |
| Quiescent Current | 0.7 mA |
| Voltage Relative Error | <±0.2% (Typical) |
| Voltage Resolution | 4 mV |
| Weight | 4g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0291. For a missing document or a specific revision, our experts send it to you.
The DFRobot SEN0291 is an I2C digital wattmeter module measuring voltage, current and power up to 26 V and ±8 A. It is used to evaluate power consumption and battery life of solar systems, batteries and electronic modules.
| Parameter | Value |
|---|---|
| Current Range | 0 ~ ±8A (Bidirectional current) |
| Current Relative Error | <±0.2% (Typical, manual calibration required) |
| Current Resolution | 1mA |
| Dimension | 30.0mm*22.0mm/1.18*0.87 in |
| Gravity | I2C Digital Wattmeter |
| I2C Address | Four options 0x40, 0x41, 0x44, 0x45 |
| Input Voltage (VCC) | 3.3V~5.5V |
| Interface | Gravity I2C (logic level: 0-3.3V) |
| Power range | 0 ~ 206 W |
| Power Resolution | 20 mW (Hardware) / 4 mW (Software) |
| Quiescent Current | 0.7 mA |
| Voltage Relative Error | <±0.2% (Typical) |
| Voltage Resolution | 4 mV |
| Weight | 4g |
Answers to the questions that the recorded characteristics of SEN0291 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": I2C Digital Wattmeter.
Yes — recorded under "Weight": 4g.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Bidirectional I2C Digital Wattmeter 26 V 8 A

Gravity: UART & I2C NFC Module

Gravity: 40km AS3935 Lightning Distance Sensor (I2C)

Gravity: 1602 LCD Keypad Shield For Arduino

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0291 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details