SEN0308
IP65 Capacitive Soil Moisture Sensor with Analog Output

- Interface
- 2.54-3Pin
- Supply voltage
- 3.3 ~ 5.5VDC
- Output voltage
- 0 ~ 3VDC (Analog Output)
- Cable Length
- 1.5m
IP65 Capacitive Soil Moisture Sensor with Analog Output
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0308 capacitive soil moisture sensor, fully waterproof to IP65, designed for soil moisture monitoring in gardening, automated irrigation and environmental science projects.
Overview. The DFRobot SEN0308 is a capacitive soil moisture sensor from the Gravity range, intended for monitoring soil moisture in gardens, potted plants, greenhouses and automated irrigation systems. It provides an analog signal compatible with Arduino and ESP32 microcontrollers, and with a Raspberry Pi fitted with an external ADC module.
Main characteristics. The body of the sensor is fully waterproof to IP65 and can be submerged without loss of performance. Its capacitive measurement principle avoids the corrosion typical of resistive sensors, and its scratch-resistant surface contributes to durability in wet soil. Dimensions are 175 x 30 mm.
Interfaces and connectivity. The sensor has a 2.54-3 pin interface and a 1.5 m cable, delivering an analog output of 0 to 3 VDC.
Power. The supply voltage ranges from 3.3 to 5.5 VDC.
Typical uses. Outdoor soil moisture monitoring on balconies, in gardens and on farms, for controlling irrigation systems and environmental science projects.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0308, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 3.3 ~ 5.5VDC |
| Output voltage | 0 ~ 3VDC (Analog Output) |
| Cable Length | 1.5m |
| Dimension (L x W) | 175 x 30mm / 6.89 x 1.18 inches |
| Gravity | IP65 Capacitive Soil Moisture Sensor for Arduino / ESP32 / Raspberry Pi |
| Interface | 2.54-3Pin |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0308. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0308 capacitive soil moisture sensor, fully waterproof to IP65, designed for soil moisture monitoring in gardening, automated irrigation and environmental science projects.
| Parameter | Value |
|---|---|
| Supply voltage | 3.3 ~ 5.5VDC |
| Output voltage | 0 ~ 3VDC (Analog Output) |
| Cable Length | 1.5m |
| Dimension (L x W) | 175 x 30mm / 6.89 x 1.18 inches |
| Gravity | IP65 Capacitive Soil Moisture Sensor for Arduino / ESP32 / Raspberry Pi |
| Interface | 2.54-3Pin |
Points to check before using SEN0308 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 3.3 ~ 5.5VDC |
| Output voltage | 0 ~ 3VDC (Analog Output) |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0308 can answer. A question is not asked when nothing is recorded to answer it.
3.3 ~ 5.5VDC (source: Supply voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
IP65 Capacitive Soil Moisture Sensor with Analog Output

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0308 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details