SEN0321
Electrochemical ozone O3 sensor with I2C output, 0-10 ppm

- Measuring Range
- 0 ~ 10ppm
- Interface
- Gravity-4Pin
- Storage Temperature
- -20 ~ 50 ℃
- Response time
- ≤90 seconds
Electrochemical ozone O3 sensor with I2C output, 0-10 ppm
DFRobot Gravity Sensor & Actuator System
The DFRobot SEN0321 ozone sensor measures ambient ozone concentration from 0 to 10 ppm using an electrochemical principle, with I2C output. It suits air quality monitoring and portable devices.
Ozone sensor DFRobot SEN0321. The SEN0321 from DFRobot is an electrochemical ozone O3 sensor with I2C output, designed to measure ambient ozone concentration over a range of 0 to 10 ppm. It belongs to DFRobot's Gravity range.
Measurement performance. Measuring range of 0 to 10 ppm with a resolution of 0.01 ppm (10 ppb). Warm-up time is 3 minutes or less, and response and recovery times are 90 seconds or less. The manufacturer states a life of more than 2 years in air.
Interface and power. I2C output and Gravity 4-pin interface. Working voltage of 3.3 to 5.5 V DC.
Environmental conditions. Working temperature of -20 to 50 °C, storage temperature of -20 to 50 °C, operating humidity of 15 to 95 % RH non-condensing.
Dimensions and weight. 37 mm × 27 mm, 0.022 kg.
Typical uses. Air quality monitoring, portable devices, disinfection cabinets and smart home. The manufacturer indicates compatibility with several development boards, including Arduino Uno, ESP32 and Raspberry Pi.
Integration. The I2C output allows direct connection to a microcontroller board. The manufacturer provides sample code to help build an ozone concentration monitor.
Usage precautions. Avoid prolonged contact with organic solvents, silicones, coatings and corrosive gases. Do not immerse the module in an oxygen-free environment or encapsulate it in resin. Allow 24 to 48 hours of warm-up at first power-on. Do not open the white waterproof and breathable membrane of the sensor.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0321, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Response time | ≤90 seconds |
| Detection Gas | Ozone |
| Dimension (L x W) | 37mm * 27mm/1.06*1.46 inches |
| Gravity | Electrochemical Ozone / O3 Sensor (0-10 ppm, I2C) |
| Interface | Gravity-4Pin |
| Life | > 2 years (in air) |
| Measuring Range | 0 ~ 10ppm |
| Operating Humidity | 15 ~ 95% RH (non-condensing) |
| Output signal | I2C output |
| Recovery Time | ≤90 seconds |
| Resolution | 0.01ppm (10ppb) |
| Storage Temperature | -20 ~ 50 ℃ |
| Warm-Up Time | ≤3 minutes |
| Weight | 0.022Kg |
| Working temperature | -20 ~ 50 ℃ |
| Working voltage | 3.3 ~ 5.5V DC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0321. For a missing document or a specific revision, our experts send it to you.
The DFRobot SEN0321 ozone sensor measures ambient ozone concentration from 0 to 10 ppm using an electrochemical principle, with I2C output. It suits air quality monitoring and portable devices.
| Parameter | Value |
|---|---|
| Response time | ≤90 seconds |
| Detection Gas | Ozone |
| Dimension (L x W) | 37mm * 27mm/1.06*1.46 inches |
| Gravity | Electrochemical Ozone / O3 Sensor (0-10 ppm, I2C) |
| Interface | Gravity-4Pin |
| Life | > 2 years (in air) |
| Measuring Range | 0 ~ 10ppm |
| Operating Humidity | 15 ~ 95% RH (non-condensing) |
| Output signal | I2C output |
| Recovery Time | ≤90 seconds |
| Resolution | 0.01ppm (10ppb) |
| Storage Temperature | -20 ~ 50 ℃ |
| Warm-Up Time | ≤3 minutes |
| Weight | 0.022Kg |
| Working temperature | -20 ~ 50 ℃ |
| Working voltage | 3.3 ~ 5.5V DC |
Answers to the questions that the recorded characteristics of SEN0321 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": Electrochemical Ozone / O3 Sensor (0-10 ppm, I2C).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Electrochemical ozone O3 sensor with I2C output, 0-10 ppm

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0321 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details