SEN0322
Electrochemical oxygen O2 air monitoring sensor with I2C output

- Operating Temperature
- -20~50℃
- Pressure range
- standard atmospheric pressure ±10%
- Measurement Range
- 0~25%Vol
- Response time
- ≤15 seconds
Electrochemical oxygen O2 air monitoring sensor with I2C output
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0322 electrochemical sensor measuring oxygen concentration in ambient air, with digital I2C output, intended for air-monitoring projects.
Overview. The DFRobot SEN0322 is an electrochemical oxygen O2 sensor from the Gravity range, measuring O2 concentration in ambient air. It integrates without an external analog signal converter thanks to its I2C output.
Main characteristics. The measurement range is 0 to 25 %Vol, with a resolution of 0.15 %Vol and a maximum measurement limit of 30 %Vol. Response time is 15 seconds or less, repeatability below 2 % and stability below 2 % per month. The stated lifetime is more than 2 years in air.
Interfaces and connectivity. The module communicates over an I2C interface and ships with a Gravity 4-pin I2C cable and sample code to simplify reading the data.
Power and environment. The operating voltage is 3.3 to 5.5 V DC. It operates between -20 and 50 °C, at 0 to 99 %RH humidity without condensation. Dimensions are 37 × 27 × 24.5 mm for a weight of 0.037 kg.
Typical uses. This sensor suits portable instruments, environmental monitoring systems and air-observation projects, used with boards such as Arduino Uno, ESP32 or Raspberry Pi.
Integration and calibration. The sensor can be calibrated in ambient air, which simplifies setting up oxygen measurements in a project.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0322, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Pressure range | standard atmospheric pressure ±10% |
| Response time | ≤15 seconds |
| Detection of Gas | oxygen / O2 |
| Dimension(L x W x H) | 37 * 27 * 24.5 mm/1.46 * 1.06 * 0.97 inches |
| Gravity | Electrochemical Oxygen / O2 Air Monitoring Sensor (0-25%Vol, I2C) |
| Lifetime | > 2 years (in the air) |
| Maximum Measurement limit | 30%Vol |
| Measurement Range | 0~25%Vol |
| Operating Humidity | 0~99%RH (no condensation) |
| Operating Temperature | -20~50℃ |
| Operating Voltage | 3.3 to 5.5V DC |
| Output signal | I2C output |
| Repeatability | <2% |
| Resolution | 0.15%Vol |
| Sensitivity | (0.10±0.05) mA (in the air) |
| Stability | <2% (Every month) |
| Weight | 0.037kg |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0322. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0322 electrochemical sensor measuring oxygen concentration in ambient air, with digital I2C output, intended for air-monitoring projects.
| Parameter | Value |
|---|---|
| Pressure range | standard atmospheric pressure ±10% |
| Response time | ≤15 seconds |
| Detection of Gas | oxygen / O2 |
| Dimension(L x W x H) | 37 * 27 * 24.5 mm/1.46 * 1.06 * 0.97 inches |
| Gravity | Electrochemical Oxygen / O2 Air Monitoring Sensor (0-25%Vol, I2C) |
| Lifetime | > 2 years (in the air) |
| Maximum Measurement limit | 30%Vol |
| Measurement Range | 0~25%Vol |
| Operating Humidity | 0~99%RH (no condensation) |
| Operating Temperature | -20~50℃ |
| Operating Voltage | 3.3 to 5.5V DC |
| Output signal | I2C output |
| Repeatability | <2% |
| Resolution | 0.15%Vol |
| Sensitivity | (0.10±0.05) mA (in the air) |
| Stability | <2% (Every month) |
| Weight | 0.037kg |
Points to check before using SEN0322 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 3.3 to 5.5V DC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0322 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": Electrochemical Oxygen / O2 Air Monitoring Sensor (0-25%Vol, I2C).
-20~50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Electrochemical oxygen O2 air monitoring sensor with I2C output

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0322 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details