SEN0388
Ultrasonic distance sensor 2 to 500 cm with Trig single-pin interface

- Operating Temperature Range
- -10℃~+70℃
- Effective Ranging Range
- 2cm~500cm
- Max Instantaneous Working Current
- <20mA
- Acoustic Frequency
- 40±2KHz
Ultrasonic distance sensor 2 to 500 cm with Trig single-pin interface
DFRobot Gravity Sensor & Actuator System
DFRobot URM09 non-contact ultrasonic distance sensor measuring from 2 to 500 cm with 1% accuracy, connected through a single I/O pin of a 3.3 V or 5 V microcontroller.
Overview. The DFRobot URM09 (SEN0388) is a high-performance non-contact ultrasonic distance sensor from the URM09 series, in the standard PH2.0-3P Gravity vertical interface. It works on the same principle as SR04 ultrasonic modules: a trigger pulse from the host starts the measurement, and the sensor outputs a high pulse whose duration matches the ultrasonic flight time.
Main characteristics. Effective measuring range of 2 to 500 cm, tested on a flat wall, with 1% accuracy and 1 cm resolution. The acoustic frequency is 40±2 kHz and the ranging frequency reaches 25 Hz maximum. Dimensions are 47×22 mm.
Interfaces and connectivity. Input and output signals are multiplexed onto a single signal port, so one I/O pin of the controller is enough to perform the distance measurement. The PH2.0-3P connector is included.
Power and environment. Operating voltage of 3.3 to 5.5 V DC, maximum instantaneous working current below 20 mA, operating temperature range of -10 °C to +70 °C.
Typical uses. Distance measurement with 3.3 V or 5 V controllers such as Arduino or Raspberry Pi boards, using the single-pin trigger scheme.
Integration. The module ships with the sensor and one PH2.0-3P connector. It is CE and RoHS certified.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0388, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | 1% |
| Acoustic Frequency | 40±2KHz |
| Dimension | 47×22mm/1.85×0.87” |
| Effective Ranging Range | 2cm~500cm |
| Gravity | URM09 Ultrasonic Distance Sensor (2~500cm, Trig) |
| Max Instantaneous Working Current | <20mA |
| Operating Temperature Range | -10℃~+70℃ |
| Operating Voltage | 3.3~5.5V DC |
| Ranging Frequency | 25Hz Max |
| Resolution | 1cm |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0388. For a missing document or a specific revision, our experts send it to you.
DFRobot URM09 non-contact ultrasonic distance sensor measuring from 2 to 500 cm with 1% accuracy, connected through a single I/O pin of a 3.3 V or 5 V microcontroller.
| Parameter | Value |
|---|---|
| Accuracy | 1% |
| Acoustic Frequency | 40±2KHz |
| Dimension | 47×22mm/1.85×0.87” |
| Effective Ranging Range | 2cm~500cm |
| Gravity | URM09 Ultrasonic Distance Sensor (2~500cm, Trig) |
| Max Instantaneous Working Current | <20mA |
| Operating Temperature Range | -10℃~+70℃ |
| Operating Voltage | 3.3~5.5V DC |
| Ranging Frequency | 25Hz Max |
| Resolution | 1cm |
Points to check before using SEN0388 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Max Instantaneous Working Current | <20mA |
| Operating Voltage | 3.3~5.5V DC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0388 can answer. A question is not asked when nothing is recorded to answer it.
-10℃~+70℃ (source: Operating Temperature Range).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ultrasonic distance sensor 2 to 500 cm with Trig single-pin interface

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0388 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details