SEN0404
XYZ Tristimulus Color Sensor with I2C Interface

- Operating Temperature Range
- -30℃~85℃
- LED Operating Current
- <15mA
- Operating Current
- <5mA
- Dimension
- 22*27mm/0.87*1.06”
XYZ Tristimulus Color Sensor with I2C Interface
DFRobot Gravity Sensor & Actuator System
DFRobot TCS3430 tristimulus color sensor with XYZ filters, measuring ambient light and color for display calibration and color detection, with an I2C interface.
TCS3430 color sensor by DFRobot. The DFRobot Gravity TCS3430 is a tristimulus color sensor in Gravity format, reference SEN0404, designed to measure ambient light and color.
Main characteristics. The TCS3430 integrates an XYZ tristimulus filter based on the CIE 1931 colorimetric model, with a spectral response close to that of the human eye. It is specified at ±10% accuracy for illuminance and correlated color temperature, with a wide dynamic range, high sensitivity, and programmable gain and integration time.
Interfaces and connectivity. The sensor connects via I2C at address 0x39, using the 4-pin Gravity I2C/UART connector supplied.
Power and environment. Power supply from 3.3 V to 5 V, operating current below 5 mA and LED operating current below 15 mA, operating temperature range -30 °C to 85 °C. Dimensions: 22 × 27 mm.
Typical uses. Color detection, brightness detection, white balance detection and color temperature measurement, for example for automatic display calibration or color matching checks.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0404, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimension | 22*27mm/0.87*1.06” |
| Gravity | TCS3430 Tristimulus Color Sensor |
| I2C Address | 0x39 |
| LED Operating Current | <15mA |
| Operating Current | <5mA |
| Operating Temperature Range | -30℃~85℃ |
| Power supply | 3.3V~5V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0404. For a missing document or a specific revision, our experts send it to you.
DFRobot TCS3430 tristimulus color sensor with XYZ filters, measuring ambient light and color for display calibration and color detection, with an I2C interface.
| Parameter | Value |
|---|---|
| Dimension | 22*27mm/0.87*1.06” |
| Gravity | TCS3430 Tristimulus Color Sensor |
| I2C Address | 0x39 |
| LED Operating Current | <15mA |
| Operating Current | <5mA |
| Operating Temperature Range | -30℃~85℃ |
| Power supply | 3.3V~5V |
Points to check before using SEN0404 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| LED Operating Current | <15mA |
| Operating Current | <5mA |
| Power supply | 3.3V~5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0404 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "I2C Address": 0x39.
-30℃~85℃ (source: Operating Temperature Range).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
XYZ Tristimulus Color Sensor with I2C Interface

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0404 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details