LIS331HH – Triple Axis I2C Accelerometer with Selectable ±6g/±12g/±24g Scales

Triple Axis I2C Accelerometer with Selectable ±6g/±12g/±24g Scales

DFRobot Gravity Sensor & Actuator System

  • -40℃~+85℃
  • Gravity-I2C
  • 0.5Hz~1KHz
  • 27*27mm/1.06*1.06”
Manufacturer part number
SEN0411
Manufacturer
DFRobot
Operating Temperature
-40℃~+85℃
Interface
Gravity-I2C

LIS331HH triple axis linear accelerometer with ultra-low power consumption, for acceleration measurement, free-fall detection and motion-activated functions.

Product overview

Overview. The DFRobot SEN0411 is a LIS331HH triple axis linear accelerometer, a Gravity-format module measuring 27 × 27 mm, designed to measure accelerations with output data rates from 0.5 Hz to 1 kHz.

Main characteristics. Selectable scales of ±6g, ±12g and ±24g, with 16-bit data output. Current consumption is 10 µA in low power mode and 0.3 mA in normal mode.

Interfaces and connectivity. The module uses a Gravity-I2C interface, solderless, with a default I2C address of 0x19, changeable to 0x18 with a toggle switch. A Gravity-4P I2C/UART sensor connector is supplied.

Power and environment. The operating voltage ranges from 3.3 V to 5 V. The operating temperature range is -40 °C to +85 °C, and the sensor withstands a 10000 g high shock.

Typical uses. Free-fall detection, motion-activated functions, gaming and virtual reality input devices, navigation and robotics.

Integration. Direct connection on an I2C bus, mounting with holes of 3 mm inner diameter.

See all specifications

Highlights

  • Frequency: 0.5Hz~1KHz
  • Gravity: I2C LIS331HH Triple Axis Accelerometer (±6g/±12g/±24g)
  • I2C Address: 0x19 (Default)/0x18 (Optional)
  • Interface: Gravity-I2C
  • Module size: 27*27mm/1.06*1.06”
  • Operating Current: 10uA(low power mode)/0.3mA(Normal mode)

Good to know before integrating

  • Thermal: rated operating range -40℃~+85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote