SEN0460
PM2.5 Laser Scattering Air Quality Sensor, I2C Interface

- Working Temperature Range
- -10~+60℃
- Working Humidity Range
- 0~95%% (non-condensing)
- Particle Measurement Range
- 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm
- Maximum Working Current
- 100mA
PM2.5 Laser Scattering Air Quality Sensor, I2C Interface
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0460 digital air quality sensor measuring PM2.5, PM1.0 and PM10 particulate matter by laser scattering, for indoor air monitoring and environmental improvement equipment.
Overview. The DFRobot SEN0460 air quality sensor, part of the Gravity range, measures airborne particulate matter PM2.5, PM1.0 and PM10. Based on laser scattering, it counts the number of particles of different sizes per unit volume of air and converts this particle distribution into mass concentration output. It is designed to provide continuous, real-time measurements.
Main characteristics. The sensor measures particle ranges of 0.3 to 1.0 µm, 1.0 to 2.5 µm and 2.5 to 10 µm, with a particle counting efficiency of 50% at 0.3 µm and 98% at 0.5 µm and above. The mass concentration resolution is 1 µg/m³ and the effective range of the PM2.5 mass concentration is 0 to 500 µg/m³. The comprehensive response time is 10 s or less and the single response time is less than 1 s. The minimum recognisable particle size is 0.3 µm, and the sensor is stated to have a zero false alarm rate.
Interfaces and connectivity. The sensor communicates through an I2C interface and a serial port. Data interface levels are L below 0.8 V and H above 2.7 V, with a maximum voltage level of 3.3 V. The Gravity connector format allows connection to most main controllers, and sample code is provided to speed up development.
Power and environment. The working voltage is 3.3 V to 5 V, with a maximum working current of 100 mA and a standby current of 2 mA or less. The working temperature range is -10 to +60 °C and the working humidity range is 0 to 95% non-condensing. The mean time between failures is 5 years or more. Dimensions are 72 x 40 x 14 mm, with six-sided shielding for improved anti-interference.
Typical uses. This sensor is intended for embedding in instruments and meters or environmental improvement equipment that monitor airborne particulate concentration. The manufacturer indicates suitability for environments such as smoking rooms, kitchens, bathrooms and hot springs.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0460, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Comprehensive Response Time | ≤10s |
| Data Interface Level | L<0.8V, H>2.7V, maximum voltage level 3.3V |
| Gravity | PM2.5 Air Quality Sensor |
| Maximum Working Current | 100mA |
| Mean time between failures | ≥5 years |
| Particle Counting Efficiency | 50% @ 0.3μm 98% @ ≥0.5μm |
| Particle Measurement Range | 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm |
| Product Size | 72mm * 40mm * 14mm / 2.83 * 1.57 * 0.55 inch |
| Resolution of Particle Mass Concentration | 1ug/m³ |
| Single Response Time | <1s |
| Standard Volume | 0.1 L |
| Standby Current | ≤2mA |
| Working Humidity Range | 0~95%% (non-condensing) |
| Working Temperature Range | -10~+60℃ |
| Working voltage | 3.3V~5V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0460. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0460 digital air quality sensor measuring PM2.5, PM1.0 and PM10 particulate matter by laser scattering, for indoor air monitoring and environmental improvement equipment.
| Parameter | Value |
|---|---|
| Comprehensive Response Time | ≤10s |
| Data Interface Level | L<0.8V, H>2.7V, maximum voltage level 3.3V |
| Gravity | PM2.5 Air Quality Sensor |
| Maximum Working Current | 100mA |
| Mean time between failures | ≥5 years |
| Particle Counting Efficiency | 50% @ 0.3μm 98% @ ≥0.5μm |
| Particle Measurement Range | 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm |
| Product Size | 72mm * 40mm * 14mm / 2.83 * 1.57 * 0.55 inch |
| Resolution of Particle Mass Concentration | 1ug/m³ |
| Single Response Time | <1s |
| Standard Volume | 0.1 L |
| Standby Current | ≤2mA |
| Working Humidity Range | 0~95%% (non-condensing) |
| Working Temperature Range | -10~+60℃ |
| Working voltage | 3.3V~5V |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
PM2.5 Laser Scattering Air Quality Sensor, I2C Interface

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0460 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details