SEN0476
Calibrated Electrochemical Phosphine PH3 Gas Sensor I2C UART

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
Calibrated Electrochemical Phosphine PH3 Gas Sensor I2C UART
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0476 electrochemical phosphine (PH3) gas sensor, 0 to 1000 ppm, factory calibrated, for gas safety monitoring and environmental analysis.
Overview. The DFRobot SEN0476 is a phosphine (PH3) gas detection module using an electrochemical gas sensor, delivered factory calibrated. It measures phosphine concentration for safety monitoring and environmental analysis.
Main characteristics. Detection range of 0 to 1000 ppm. The module operates from 3.3 to 5.5 V DC with a working current below 5 mA. Its lifespan exceeds 2 years in air. It works between -20 and 50 °C and between 15 and 90 %RH non-condensing.
Interfaces and connectivity. I2C, UART (0 to 3 V) and analog voltage outputs. The module is compatible with Arduino, ESP32 and Raspberry Pi boards. Adapter plate size: 37 × 32 mm.
Typical uses. Integration into embedded industrial gas monitoring, research or environmental monitoring systems, with direct reading by microcontroller over I2C or UART.
Storage conditions. Storage temperature of -20 to 50 °C, storage humidity of 15 to 90 %RH non-condensing.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for SEN0476. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0476 electrochemical phosphine (PH3) gas sensor, 0 to 1000 ppm, factory calibrated, for gas safety monitoring and environmental analysis.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Calibrated Electrochemical Phosphine PH3 Gas Sensor I2C UART

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0476 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details