SEN0486
Ring 2D QR code scanner with I2C and UART interfaces

- Working current
- <70mA
- Storage Temperature
- -40°C ~80°C
- Reading Accuracy
- ≥5mil
- Communication
- I2C, UART
Ring 2D QR code scanner with I2C and UART interfaces
DFRobot Gravity Sensor & Actuator System
DFRobot Gravity Ring 2D QR code scanner for reading 1D barcodes and 2D codes, with I2C and UART communication and 3.3V/5V power supply.
Overview. The DFRobot Gravity Ring 2D QR Code Scanner SEN0486 reads common 1D barcodes and 2D QR, Data Matrix and PDF417 codes. Its compact size and Gravity interface make it easy to connect.
Main characteristics. 640 × 480 pixel image, reading angle roll 360°, pitch 55° and yaw 55°, scanning angle of 69° horizontal and 56° vertical, reading accuracy of 5 mil or better and contrast of 25% or more. It operates across an ambient light range of 0 to 100000 Lux.
Interfaces and connectivity. I2C and UART communication, suited to development on controllers such as Arduino, ESP32 or Raspberry Pi. A colorful indicator, flashing green after each successful read, shows the sensor status.
Power and environment. 3.3V/5V power supply with a working current below 70 mA. Working temperature from 20°C to 60°C, storage temperature from -40°C to 80°C, relative humidity from 5% to 95% non-condensing.
Typical uses. Self-service vending machines, subway gates, access control and payment terminals.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0486, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Code System | 1D: EAN13, EAN8, UPCA, UPCE0, UPCE1, Code128, Code39, Code93, CodeBar, Interleaved 2 of 5 |
| Communication | I2C, UART |
| Contrast | ≥25% |
| Environment Light | 0~100000Lux |
| Gravity | Ring 2D QR Code Scanner |
| Image Pixel | 640*480 |
| Light source | colorful indicator/green light flashing prompt successful reading |
| Power supply | DC3.3V/5V |
| Reading Accuracy | ≥5mil |
| Reading Angle | roll 360°, pitch 55°, yaw 55° |
| Relative humidity | 5% to 95% (non-condensing) |
| Scanning Angle | 69° (horizontal), 56° (vertical) |
| Storage Temperature | -40°C ~80°C |
| Working current | <70mA |
| Working temperature | 20°C ~60°C |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0486. For a missing document or a specific revision, our experts send it to you.
DFRobot Gravity Ring 2D QR code scanner for reading 1D barcodes and 2D codes, with I2C and UART communication and 3.3V/5V power supply.
| Parameter | Value |
|---|---|
| Code System | 1D: EAN13, EAN8, UPCA, UPCE0, UPCE1, Code128, Code39, Code93, CodeBar, Interleaved 2 of 5 |
| Communication | I2C, UART |
| Contrast | ≥25% |
| Environment Light | 0~100000Lux |
| Gravity | Ring 2D QR Code Scanner |
| Image Pixel | 640*480 |
| Light source | colorful indicator/green light flashing prompt successful reading |
| Power supply | DC3.3V/5V |
| Reading Accuracy | ≥5mil |
| Reading Angle | roll 360°, pitch 55°, yaw 55° |
| Relative humidity | 5% to 95% (non-condensing) |
| Scanning Angle | 69° (horizontal), 56° (vertical) |
| Storage Temperature | -40°C ~80°C |
| Working current | <70mA |
| Working temperature | 20°C ~60°C |
Answers to the questions that the recorded characteristics of SEN0486 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication": I2C, UART.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ring 2D QR code scanner with I2C and UART interfaces

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0486 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details