SEN0497
I2C Digital Temperature and Humidity Sensor

- Temperature range
- -40 ~ +80°C ±0.5°C
- Humidity range
- 0~100%RH ±3%RH (25°C)
- Operating Current
- <1mA
- Storage Condition
- 10℃-50℃, 20-60%RH
I2C Digital Temperature and Humidity Sensor
DFRobot Gravity Sensor & Actuator System
DHT20 digital temperature and humidity sensor with I2C output, for measuring ambient conditions on Arduino, micro:bit, ESP32 and Raspberry Pi boards.
DHT20. The DFRobot SEN0497 (Gravity) is a digital temperature and humidity sensor, an upgraded version of the DHT11, designed for Arduino, micro:bit, ESP32 and Raspberry Pi boards.
Main characteristics. The sensor combines a MEMS capacitive humidity element and a temperature element on a dedicated ASIC chip, factory calibrated. It measures from -40 to +80 °C with ±0.5 °C accuracy and 0 to 100 %RH with ±3 %RH accuracy at 25 °C. Resolution is 0.01 °C and 0.024 %RH.
Interfaces and connectivity. The output is digital I2C, address 0x38. The sensor is compatible with 3.3 to 5.5 V controllers.
Power and environment. Operating voltage is 3.3 to 5.5 V DC, with current below 1 mA. Storage is specified at 10 to 50 °C, 20 to 60 %RH. The board measures 22 × 33 mm, with mounting holes of 3.1 mm inner and 6 mm outer diameter.
Typical uses. The sensor suits HVAC, automobiles, data loggers, weather stations and home appliances.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0497, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Humidity range | 0~100%RH ±3%RH (25°C) |
| Board Dimension | 22*33 mm/0.87*1.30” |
| Gravity | DHT20 Temperature & Humidity Sensor for Arduino |
| Mounting Hole Size | Inner diameter 3.1mm (0.13”)/Outer diameter 6 mm (0.24”) |
| Operating Current | <1mA |
| Operating Voltage | 3.3V ~ 5.5V DC |
| Output signal | I2C (0×38) |
| Resolution | 0.01℃, 0.024%RH |
| Storage Condition | 10℃-50℃, 20-60%RH |
| Temperature range | -40 ~ +80°C ±0.5°C |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0497. For a missing document or a specific revision, our experts send it to you.
DHT20 digital temperature and humidity sensor with I2C output, for measuring ambient conditions on Arduino, micro:bit, ESP32 and Raspberry Pi boards.
| Parameter | Value |
|---|---|
| Humidity range | 0~100%RH ±3%RH (25°C) |
| Board Dimension | 22*33 mm/0.87*1.30” |
| Gravity | DHT20 Temperature & Humidity Sensor for Arduino |
| Mounting Hole Size | Inner diameter 3.1mm (0.13”)/Outer diameter 6 mm (0.24”) |
| Operating Current | <1mA |
| Operating Voltage | 3.3V ~ 5.5V DC |
| Output signal | I2C (0×38) |
| Resolution | 0.01℃, 0.024%RH |
| Storage Condition | 10℃-50℃, 20-60%RH |
| Temperature range | -40 ~ +80°C ±0.5°C |
Answers to the questions that the recorded characteristics of SEN0497 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Output signal": I2C (0×38).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
I2C Digital Temperature and Humidity Sensor

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0497 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details