SEN0508
Non-contact capacitive flexible liquid level sensor

- Working current
- 5V290uA 3V235uA
- Hysteresis
- ±0.25%FS
- Protection Level
- IP62
- Thickness Range(TR)
- 5mm
Non-contact capacitive flexible liquid level sensor
DFRobot Gravity Sensor & Actuator System
The SEN0508 is a flexible non-contact capacitive liquid level sensor, attached to the outer wall of a non-conductive container up to 5 mm thick to detect the presence of a liquid.
Overview. The DFRobot SEN0508 is a non-contact capacitive flexible liquid level sensor. Its flexible substrate and thin profile allow it to be attached, using a temperature-resistant and waterproof 3M adhesive on its back, to the surface of any non-conductive container whose thickness is less than 5 mm.
Working principle. The sensor uses the sensing capacitance of water. When a liquid approaches the sensing element, its parasitic capacitance couples to the static capacitance, changing the signal processed by the control circuit. When the change exceeds a set threshold, the liquid level is considered to have reached the sensing point.
Output and main characteristics. Digital output: low level when liquid is detected, high level when no liquid is detected. Hysteresis of ±0.25%FS, supported thickness range of 5 mm, protection level IP62, weight of 2 g.
Power and environment. Working voltage of 2.5 to 5.5 VDC. Working current of 290 µA at 5 V and 235 µA at 3 V. Working temperature range of -30 to 85 °C.
Typical uses. Level detection in water tanks, beverage machines, water pipes and laboratory test tubes.
Connection. 3-pin DuPont connector.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0508, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Gravity | Non-contact Capacitive Flexible Liquid Level Sensor |
| Hysteresis | ±0.25%FS |
| Output | low (liquid detected), high level(no liquid detected) |
| Protection Level | IP62 |
| Thickness Range(TR) | 5mm |
| Weight | 2g |
| Working current | 5V290uA 3V235uA |
| Working temperature | -30~85℃ |
| Working voltage | 2.5~5.5VDC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0508. For a missing document or a specific revision, our experts send it to you.
The SEN0508 is a flexible non-contact capacitive liquid level sensor, attached to the outer wall of a non-conductive container up to 5 mm thick to detect the presence of a liquid.
| Parameter | Value |
|---|---|
| Gravity | Non-contact Capacitive Flexible Liquid Level Sensor |
| Hysteresis | ±0.25%FS |
| Output | low (liquid detected), high level(no liquid detected) |
| Protection Level | IP62 |
| Thickness Range(TR) | 5mm |
| Weight | 2g |
| Working current | 5V290uA 3V235uA |
| Working temperature | -30~85℃ |
| Working voltage | 2.5~5.5VDC |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Non-contact capacitive flexible liquid level sensor

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0508 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details