SEN0514
Indoor Air Quality Sensor TVOC and eCO2 I2C

- Operating Temperature Range
- -40℃~85℃
- Working Humidity Range
- 5 %RH~95 %RH
- TVOC Measuring Range
- 0ppb~65000ppb
- Interface Mode
- I2C
Indoor Air Quality Sensor TVOC and eCO2 I2C
DFRobot Gravity Sensor & Actuator System
DFRobot ENS160 indoor air quality sensor measuring TVOC, eCO2 and AQI, designed for pollution monitoring and building automation.
Overview. The DFRobot ENS160 is an indoor air quality sensor based on ScioSense's ENS160 chip. It delivers multiple IAQ data (TVOC, eCO2, AQI) using TrueVOC™ technology, which combines metal oxide (MOX) sensing with on-chip algorithms.
Main characteristics. TVOC measuring range from 0 ppb to 65000 ppb and eCO2 measurement range from 400 ppm to 65000 ppm. The built-in automatic baseline correction keeps the sensor stable for long-term use. It is ready in less than 3 minutes after power-up.
Interfaces and connectivity. I2C interface mode, I2C addresses 0x52 and 0x53. A Gravity-4P I2C/UART sensor connector is included.
Power and environment. Power supply voltage 3.3 V to 5.5 V, working current 29 mA. Operating temperature range -40 ℃ to 85 ℃ and working humidity range 5 %RH to 95 %RH. Product size 30 x 22 mm.
Typical uses. Air purifiers, home automation devices, HVAC and ventilation systems, smart thermostats, range hoods and environmental pollution detection.
Integration. The sensor is CE and RoHS certified.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0514, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Gravity | ENS160 Air Quality Sensor |
| I2C Address | 0x52, 0x53 |
| Interface Mode | I2C |
| Operating Temperature Range | -40℃~85℃ |
| Power Supply Voltage | 3.3 V~5.5 V |
| Product Size | 30x22 mm/1.18x0.87 inch |
| TVOC Measuring Range | 0ppb~65000ppb |
| Working current | 29 mA |
| Working Humidity Range | 5 %RH~95 %RH |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0514. For a missing document or a specific revision, our experts send it to you.
DFRobot ENS160 indoor air quality sensor measuring TVOC, eCO2 and AQI, designed for pollution monitoring and building automation.
| Parameter | Value |
|---|---|
| Gravity | ENS160 Air Quality Sensor |
| I2C Address | 0x52, 0x53 |
| Interface Mode | I2C |
| Operating Temperature Range | -40℃~85℃ |
| Power Supply Voltage | 3.3 V~5.5 V |
| Product Size | 30x22 mm/1.18x0.87 inch |
| TVOC Measuring Range | 0ppb~65000ppb |
| Working current | 29 mA |
| Working Humidity Range | 5 %RH~95 %RH |
Points to check before using SEN0514 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power Supply Voltage | 3.3 V~5.5 V |
| Working current | 29 mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0514 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "I2C Address": 0x52, 0x53.
3.3 V~5.5 V (source: Power Supply Voltage).
-40℃~85℃ (source: Operating Temperature Range).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Indoor Air Quality Sensor TVOC and eCO2 I2C

Gravity: MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART)

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0514 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details