SEN0518
MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART)

- Operating Temperature Range
- -40℃~85℃
- Power Supply Voltage
- 3.3V/5V
- Working current
- <15mA
- Communication Method
- I2C/UART
MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART)
DFRobot Gravity Sensor & Actuator System
Heart rate and blood oxygen sensor module integrating the MAX30102 chip and an MCU with algorithm, with I2C or UART output. Intended for monitoring projects, not for medical use.
Overview. The DFRobot Gravity MAX30102 is a PPG heart rate and oximeter sensor integrating the Maxim MAX30102 chip and an MCU with a calculation algorithm. The photoplethysmography measurement is converted into heart rate and oximetry values by the MCU, which reduces the load on the main controller.
Main characteristics. 3.3V/5V power supply, working current below 15 mA, operating temperature range of -40℃ to 85℃, size 25.5 × 32 mm.
Interfaces and connectivity. I2C communication at address 0x57 or UART at 9600 baud. A Gravity-4P I2C/UART connector is supplied, and data can be read directly from a PC using the supplied upper computer.
Typical uses. Heart rate and blood oxygen projects, home heart rate oximeter, long-term heart rate and blood oxygen monitoring. The manufacturer states that the product is not a professional medical instrument and should not be used as an auxiliary accessory in diagnosis or treatment.
Integration. Compatible with a DFRduino UNO R3 or a Raspberry Pi. The sensor should be worn on a finger, as direct pressure may affect the data output.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0518, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Communication Method | I2C/UART |
| Gravity | MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART) |
| I2C Address | 0x57 |
| Operating Temperature Range | -40℃~85℃ |
| Power Supply Voltage | 3.3V/5V |
| Product Size | 25.5×32mm/0.98×1.26inch |
| Serial Port Baud Rate | 9600 |
| Working current | <15mA |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0518. For a missing document or a specific revision, our experts send it to you.
Heart rate and blood oxygen sensor module integrating the MAX30102 chip and an MCU with algorithm, with I2C or UART output. Intended for monitoring projects, not for medical use.
| Parameter | Value |
|---|---|
| Communication Method | I2C/UART |
| Gravity | MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART) |
| I2C Address | 0x57 |
| Operating Temperature Range | -40℃~85℃ |
| Power Supply Voltage | 3.3V/5V |
| Product Size | 25.5×32mm/0.98×1.26inch |
| Serial Port Baud Rate | 9600 |
| Working current | <15mA |
Points to check before using SEN0518 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power Supply Voltage | 3.3V/5V |
| Working current | <15mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0518 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication Method": I2C/UART.
3.3V/5V (source: Power Supply Voltage).
-40℃~85℃ (source: Operating Temperature Range).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART)

Gravity: 2.0 Inch IPS Color Serial Display with I2C & UART (Support micro:bit & MakeCode Graphical Programming)

Gravity: ENS160 Air Quality Sensor

Gravity: 1602 LCD Keypad Shield For Arduino

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0518 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details