SEN0529
3-axis I2C magnetometer sensor, low noise

- Operating Temperature
- -40 to 85°C
- Measuring Range
- ±1300μT (x & y axis), ±2047μT (z-axis)
- Operating Current
- 1.7mA@ frequency 10Hz
- Communication
- I2C
3-axis I2C magnetometer sensor, low noise
DFRobot Gravity Sensor & Actuator System
Low-power 3-axis geomagnetic sensor for compass and navigation applications, with an I2C interface and a measuring range of ±1300 µT on the X and Y axes.
Overview. The Gravity BMM150 Triple Axis Magnetometer Sensor (SEN0529) from DFRobot is a 3-axis magnetometer based on the Bosch BMM150 sensor, designed for low-power compass applications.
Main characteristics. Measuring range of ±1300 µT on the X and Y axes and ±2047 µT on the Z axis, resolution of 0.3 µT and low noise of 0.3 to 1.4 µT. Accuracy reaches 30 µT on the horizontal geomagnetic field component, i.e. ±2.5°. Non-linearity is below 1% FS and start-up time is 3 ms.
Interfaces and connectivity. I2C communication with four configurable addresses set by a 2-bit DIP switch, and a programmable interrupt pin. Supplied with a Gravity-4P I2C/UART sensor cable and a 5-pin single-row pin header.
Power and environment. Power supply of 3.3 V to 5 V, operating current of 1.7 mA at 10 Hz, operating temperature from -40 to 85 °C. Zero offset of ±40 µT, or ±2 µT after software optimisation.
Typical uses. Electronic compass, indoor and outdoor navigation, head motion tracking, augmented reality, tilt-compensated electronic maps, drones and robot navigation and positioning.
Integration. Compatible with the FireBeetle 2 ESP32-E IoT microcontroller, following the connection diagram provided by the manufacturer.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0529, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | 30μT horizontal geomagnetic field component, ±2.5° |
| Communication | I2C |
| Gravity | BMM150 Triple Axis Magnetometer Sensor |
| Low Noise | 0.3-1.4μT |
| Measuring Range | ±1300μT (x & y axis), ±2047μT (z-axis) |
| Non-Linearity | <1%FS |
| Operating Current | 1.7mA@ frequency 10Hz |
| Operating Temperature | -40 to 85°C |
| Power supply | 3.3V-5V |
| Resolution | 0.3μT |
| Start-up Time | 3ms |
| Zero Offset | ±40μT/±2μT (software optimized) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0529. For a missing document or a specific revision, our experts send it to you.
Low-power 3-axis geomagnetic sensor for compass and navigation applications, with an I2C interface and a measuring range of ±1300 µT on the X and Y axes.
| Parameter | Value |
|---|---|
| Accuracy | 30μT horizontal geomagnetic field component, ±2.5° |
| Communication | I2C |
| Gravity | BMM150 Triple Axis Magnetometer Sensor |
| Low Noise | 0.3-1.4μT |
| Measuring Range | ±1300μT (x & y axis), ±2047μT (z-axis) |
| Non-Linearity | <1%FS |
| Operating Current | 1.7mA@ frequency 10Hz |
| Operating Temperature | -40 to 85°C |
| Power supply | 3.3V-5V |
| Resolution | 0.3μT |
| Start-up Time | 3ms |
| Zero Offset | ±40μT/±2μT (software optimized) |
Points to check before using SEN0529 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | 1.7mA@ frequency 10Hz |
| Power supply | 3.3V-5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0529 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication": I2C.
-40 to 85°C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
3-axis I2C magnetometer sensor, low noise

Gravity: I2C RGB LED Colorful Button Module

Gravity: SHT31-F Digital Temperature and Humidity Sensor

Gravity: SGP40 Air Quality Sensor

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0529 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details